Titan Safety Lanyard: Reliable Fall Protection
The Miller Titan II T6111-Z7/6FTAF is a 6 ft single-leg shock-absorbing safety lanyard with locking snap hooks at both ends. Its integrated shock pack expands during a fall to reduce arresting forces. Use it to connect a compatible full-body harness to an approved anchorage as part of a complete personal fall-arrest system.
This orange web lanyard is a fixed-length, non-stretch model. It provides a straightforward connection for construction and industrial maintenance where the work area has adequate fall clearance. It is not the Titan tie-back model and should not be wrapped around a structure and clipped back onto its own webbing.
Quick Buying Details
Miller Titan II
T6111-Z7/6FTAF
ST6111-Z7/6FTAF
6 ft / Single leg
Locking snap hook at each end
Integrated pack-type shock absorber
Key Features
- Shock pack helps limit forces transmitted during fall arrest.
- Locking snap hooks connect to compatible attachment points.
- Manufacturer-listed connector gate strength of 3,600 lb.
- Orange, non-stretch webbing; not reflective.
Common Uses & Applications
- Construction work with a planned fall-arrest system.
- Industrial maintenance at elevated work locations.
- Facility tasks where anchorage position and clearance permit a 6 ft energy-absorbing lanyard.
Connection and Clearance Requirements
Connect the shock-absorber end to the harness attachment specified by Miller’s instructions. Confirm that each hook closes and locks without interference. A hook’s gate-strength rating is not a worker-weight rating or an anchorage capacity.
Six feet describes lanyard length, not the required clearance below the worker. Calculate clearance using the manufacturer’s instructions, including absorber deployment, harness movement, worker dimensions and a safety margin. Account for swing falls and nearby obstructions. Confirm the permitted total user weight, including clothing and tools, from the supplied label.
Applicable Safety Requirements
OSHA 1926.502(d) covers construction personal fall-arrest systems, including compatible connectors, anchorage, clearance and inspection. OSHA 1910.140 addresses general-industry personal fall protection. Product selection alone does not establish a compliant system.
Inspect before use and remove damaged or deployed equipment from service. Arrange prompt rescue before work begins. Follow the supplied instructions and certification label; do not assume the certifications of another Titan variant apply.
Manufacturer Documentation
Miller Titan II T6111-Z7 specification sheet — PDF. This official sheet includes the 6 ft T6111-Z7/6FTAF configuration.
FAQ
Can this lanyard be used for tie-back anchoring?
No. Select a lanyard expressly designed for tie-back use when that connection method is required.
Does one leg provide continuous tie-off while changing anchors?
No. Plan transitions with equipment and procedures that maintain the required protection.
Is the shock pack reusable after deployment?
No. Remove the lanyard from service after a fall or absorber deployment.
