Miller Manyard II Shock Absorbing Lanyard - 6 ft, Locking Snap Hooks

Miller
SKU:
S216M-Z7/6FTGN
|
UPC:
997853770528
$152.69
Bulk Pricing:

Below are the available bulk discount rates for each individual item when you purchase a certain amount

  • Buy 2 - 5 and get 3% off
  • Buy 6 or above and get 5% off
(No reviews yet)
Miller Manyard II shock absorbing lanyard, 6 ft stretchable design with dual locking snap hooks, 310 lb capacity, and red core wear indicator. OSHA & ANSI compliant.
Current Stock:
Adding to cart… The item has been added

Miller Manyard II Shock Absorbing Lanyard – 6 Ft with Locking Snap Hooks

The Miller Manyard II 216M-Z7/6FTGN is a single-leg stretch shock-absorbing lanyard for construction, structural steel and industrial maintenance. It extends to 6 feet and contracts to approximately 4 feet, helping reduce loose length that can drag or snag as the worker moves within an approved work area.

ASA SKU
S216M-Z7/6FTGN
Manufacturer model
216M-Z7/6FTGN
Length
Approximately 4–6 ft
Configuration
Single leg
Connections
Two steel locking snap hooks
Hook opening
3/4 in
Maximum user weight
310 lb, including clothing and tools

Key Features

  • A polyester shock-absorbing core extends under fall loading to reduce arrest forces.
  • A green tubular polyester jacket protects the core and serves as a backup strap.
  • The red inner core and fall-arrest warning flag support inspection and removal-from-service decisions.
  • Elastic construction helps manage excess length without changing the clearance required for a fall.

Common Uses

  • Construction and structural steel work with compatible anchorage.
  • Industrial maintenance and equipment access at height.
  • Transportation and utility tasks where a single-leg energy-absorbing lanyard suits the assessed work.

Selection and Use

Use a stretch lanyard when trailing length is a concern, but select it by connector fit, permitted free fall and required clearance. A single leg does not maintain attachment while it is disconnected to change anchors. Plan transitions so the worker remains protected whenever exposure requires it. Do not wrap this model around a structure and hook it back to itself unless the manufacturer explicitly authorizes that arrangement.

Standards and Safety

Miller specification SP436 distinguishes Z7 models from other Manyard II versions. The Z7 designation identifies ANSI Z359.13 specifications: 900 lbf average and 1,800 lbf maximum arrest force, with 48 inches of specified deployment. Do not transfer the sheet’s separate Category 1 CSA claim or 900 lbf maximum-force rating to this Z7 model. Follow the supplied label and instructions for the complete installation.

Employers must select compatible components, provide training and plan for prompt rescue. OSHA 1926.502 addresses construction fall-protection systems; OSHA 1910.140 applies to general-industry personal fall protection. These are employer requirements, not OSHA product approvals.

Manufacturer Documents

FAQ

What does a visible red core mean?

Remove the lanyard from service and follow Miller’s instructions. Do the same for a deployed fall indicator, damaged stitching, cuts or failed inspection.

Is the 6-foot length the fall-clearance requirement?

No. Clearance must account for deployment and the other factors in the manufacturer’s instructions.

Will either snap hook fit every harness or anchor?

No. Check connector geometry and locking action against the mating attachment. A shared standards marking does not establish compatibility.

Miller Manyard II shock absorbing lanyard, 6 ft stretchable design with dual locking snap hooks, 310 lb capacity, and red core wear indicator. OSHA & ANSI compliant.