MSA Advantage 3200 Full Face Respirator | Panoramic
The MSA Advantage 3200 full face respirator combines a panoramic lens with a soft silicone sealing surface for industrial respiratory protection programs. Its twin-port design accepts approved MSA Advantage filters and cartridges, sold separately. Select the facepiece size and filtration configuration for the worker, contaminant and measured exposure.
MSA / Advantage 3200
MSA10028995
Soft silicone sealing surface
Scratch-resistant, wraparound design
Twin-port MSA Advantage system
Facepiece; cartridges and filters separate
Key Features
- Wide field of view supports visibility during work.
- Silicone sealing surface conforms to facial contours.
- Nosecup helps reduce lens fogging.
- Replaceable components support routine maintenance.
- MSA lists ANSI Z87.1 high-impact lens performance.
Common Uses & Applications
For assessed hazards in manufacturing, industrial maintenance, construction, utilities and oil and gas operations. Sanding and grinding require appropriate particulate filters; chemical handling and coating tasks require selection for the specific gases, vapors and particles present. Full-face coverage does not make every cartridge suitable for every task.
Cartridge Selection and Compatibility
Use only the MSA components listed in the applicable NIOSH approval. The facepiece alone provides no contaminant filtration. Particulate filters do not provide general gas/vapor protection, and another brand’s cartridges must not be substituted. Review the chemical SDS, exposure assessment and MSA selection guidance before use.
OSHA Requirements and Fit Testing
Required use must follow OSHA 29 CFR 1910.134, including a written program, medical evaluation, training and fit testing. An assigned protection factor of 50 for a negative-pressure full-face respirator requires quantitative fit testing and an effective respiratory protection program. Qualitative fit testing limits use to exposures no greater than 10 times the permissible exposure limit.
Perform a seal check every time the mask is donned. Facial hair, eyewear or other equipment must not interfere with the seal. Do not use in oxygen-deficient, unknown or immediately dangerous to life or health atmospheres. Follow any stricter substance-specific requirements.
Inspection and Service Life
Inspect the lens, seal, valves, harness and connections before use. Clean and maintain the facepiece according to MSA instructions. Gas/vapor cartridges require an appropriate approved end-of-service-life indicator or a change schedule based on objective information; smell alone is not a replacement schedule.
Official MSA Reference
MSA respirator reference PDF — Advantage 3200 features and ordering information, pages 4 and 6. This manufacturer brochure covers several models; consult the 3200 sections.
FAQ
Does this include cartridges or filters?
No. Order compatible, hazard-specific cartridges or filters separately.
What does part number 10028995 identify?
MSA identifies 10028995 as the medium Advantage 3200 with a rubber harness. Other sizes and harness options have different part numbers.
Can I wear ordinary eyeglasses underneath?
Eyeglass temples must not pass through or disrupt the sealing surface. Use an appropriate spectacle insert when corrective lenses are needed.
-
This product is awesome! I really love it. The service is very good and I will buy again!
