MSA Advantage 200LS Half Mask Respirator | Reusable NIOSH-Approved
The MSA Advantage 200 LS half mask respirator features a soft thermoplastic rubber facepiece, MultiFlex pressure-distributing system and AnthroCurve sealing surface. Its reusable design supports industrial respiratory protection programs that use interchangeable MSA Advantage filters and cartridges. Filters and cartridges are sold separately; select the approved combination for the identified workplace hazard.
MSA / Advantage 200 LS
MSA815444
Small, Medium, Large / Blue
Thermoplastic rubber
MSA Advantage bayonet system
Facepiece; filters and cartridges separate
Key Features
- Lightweight facepiece for routine workplace use.
- MultiFlex system helps distribute facial pressure.
- AnthroCurve sealing surface follows facial contours.
- Three sizes support individual fit selection.
- Replaceable components support cleaning and maintenance.
Common Uses & Applications
For assessed respiratory hazards in manufacturing, construction, utilities and industrial maintenance. Tasks may include sanding or grinding with approved particulate filters, or chemical handling with the appropriate gas/vapor cartridges. The task name alone does not establish suitability: contaminant identity, concentration and exposure limits determine selection.
Cartridge Compatibility and Selection
Use only components listed for the selected NIOSH-approved MSA assembly. The facepiece alone has no P100 rating and provides no contaminant filtration. Particulate filters do not provide general gas/vapor protection. Do not substitute another brand’s cartridges based on appearance or physical fit.
OSHA Respiratory Protection Requirements
Required use must follow OSHA 29 CFR 1910.134, including medical evaluation, training, fit testing and a written respiratory protection program. A properly selected negative-pressure half mask has an assigned protection factor of 10 under an effective program; applicable substance-specific rules may impose additional limits.
Perform a user seal check each time the mask is donned. Facial hair must not interfere with the seal or valves. Do not use in oxygen-deficient, unknown or immediately dangerous to life or health atmospheres. This half mask does not protect the eyes.
Inspection and Replacement Planning
Inspect the facepiece, harness, valves and connections before use. Clean and maintain according to MSA instructions. Establish a gas/vapor cartridge change schedule using objective service-life information unless an appropriate approved end-of-service-life indicator is used. Do not rely on odor alone.
Manufacturer Reference
MSA respirator reference PDF — Advantage 200 LS features and ordering details, pages 4 and 6. This manufacturer brochure covers several respirators; use the sections specific to the 200 LS.
FAQ
Does one size fit every worker?
No. Select the size through fit testing. Comfort features do not guarantee a seal for every face.
Is 815444 the part number for every size?
No. MSA identifies 815444 as the medium, single-neckstrap version. Other sizes and strap configurations have different part numbers.