Miller TurboLite+ Scorpion 9 ft Personal Fall Limiter
The Miller TurboLite+ Scorpion MTL-OHS1-01/9FT is a single-web personal fall limiter for construction and industrial work at height. Its 9-foot retracting lifeline accommodates movement within an approved work area, while a stainless steel braking mechanism responds to a fall. This configuration includes a steel carabiner and a steel locking snap hook.
SMTL-OHS1-01/9FT
MTL-OHS1-01/9FT
9 ft
Webbing; not steel cable
ANSI Z359.14-2021 Class 1
130–310 lb total weight
130–420 lb; follow system limits
Key Features
- High-impact nylon housing protects the mechanism during normal industrial use.
- A visual load indicator helps identify a unit that must be removed from service.
- Retracting webbing reduces loose line compared with a fixed-length lanyard.
- The manufacturer permits harness-mounted or anchor-mounted arrangements when installed as instructed.
Common Uses
- Construction with anchorage at or above the dorsal D-ring.
- Manufacturing and elevated plant maintenance.
- Platform work with a verified anchorage, compatible connections and sufficient clearance.
Selection and Use
Class 1 requires anchorage at or above the dorsal D-ring. Do not choose this model for foot-level tie-off or assume leading-edge approval. A short arrest distance does not establish the total clearance needed beneath a worker. Account for anchorage position, swing falls, worker dimensions, harness movement and the manufacturer’s clearance requirements. One unit serves one worker.
Standards and Safety
The matching technical sheet lists ANSI Z359.14-2021 Class 1 and CSA Z259.2.2-2017 Class SRL. Its ANSI/CSA maximum is 310 lb, while the stated OSHA maximum is 420 lb. Include clothing and tools in total weight, and apply the lowest limit of all connected components. Inspect before each use and follow the manufacturer’s competent-person inspection and service requirements.
Employers must select compatible components, provide training and plan for prompt rescue. OSHA 1926.502 addresses construction fall-protection systems; OSHA 1910.140 applies to general-industry personal fall protection. These are employer requirements, not OSHA product approvals.
Manufacturer Documents
FAQ
Can this be used with an anchor below the worker’s back D-ring?
No. This Class 1 model requires anchorage at or above the dorsal D-ring. Select a specifically approved system for a different configuration.
Does it fit every ANSI-rated harness?
Do not assume universal compatibility. Verify connector size, shape, orientation and harness attachment instructions before use.
Is its 9-foot length the required fall clearance?
No. Working length and fall clearance are different measurements. Use the manufacturer’s clearance instructions for the actual installation.