MSA American Eagle Hard Hat for Construction and Industrial Work
The MSA American Eagle hard hat combines patriotic graphics with V-Gard head protection for construction, manufacturing and maintenance work. Model 10079479 belongs to the American Freedom Series and uses a slotted cap-style shell with a Fas-Trac III ratchet suspension. Its eagle and American flag design provides a distinctive appearance while retaining the practical fit adjustments needed on the job.
MSA / 10079479
S10079479
Polyethylene with thermoformed graphics
Slotted protective cap
Type I, Class E
Fas-Trac III ratchet
Hat sizes 6½–8
ANSI/ISEA Z89.1-2014; CAN/CSA Z94.1-2015
Key Features
- American Eagle decoration for a recognizable patriotic look.
- Ratchet adjustment helps establish a secure, comfortable fit.
- Nape adjustments allow the suspension to sit appropriately at the back of the head.
- Accessory slots accommodate compatible equipment approved by MSA.
Common Uses
- Construction sites requiring Type I head protection.
- Manufacturing and production facilities.
- Industrial repair and maintenance departments.
- General plant work with identified overhead hazards.
Choosing Head Protection for the Job
Type I identifies top-impact protection. This cap should not replace a Type II helmet where the hazard assessment requires lateral-impact protection. Class E describes the helmet’s electrical classification; it does not authorize energized work or replace other required electrical protective equipment. The decorative graphics do not establish a high-visibility rating.
Under OSHA 29 CFR 1910.135, employers must provide appropriate protective helmets where falling objects present a head-injury risk, and electrical protection where exposed conductors could contact the head. OSHA 29 CFR 1926.100 addresses head protection in construction. Selection must match the actual task and exposure.
Fit, Inspection and Accessories
Adjust the suspension before starting work and inspect both shell and suspension for damage or deterioration. Follow MSA’s replacement instructions after an impact. Use compatible replacement parts and verify accessory compatibility before adding face or hearing protection. Do not drill the shell or make unapproved modifications.
Manufacturer Documentation
MSA Fas-Trac III and Freedom Series bulletin (PDF) lists American Eagle model 10079479 on page 6. This manufacturer bulletin covers multiple helmets and includes earlier standards editions. The standards above follow MSA’s current model-specific listing; confirm the markings and instructions supplied with your helmet.
FAQ
Is this a full-brim hard hat?
No. Model 10079479 is a slotted cap-style hard hat from MSA’s American Freedom Series.
Can it be used for industrial work?
Yes, where the employer’s hazard assessment specifies Type I, Class E head protection. The patriotic design does not change its intended industrial use.
Does it include a face shield or earmuffs?
This listing is for the hard hat. Select any additional protective equipment separately and verify compatibility with MSA.
