MCR Safety 3150 Fleece-Lined Split Leather Driver Gloves
MCR Safety 3150 fleece-lined leather driver gloves combine tan split cowhide with a soft red fleece interior for general handling in cold conditions. The straight thumb, slip-on cuff and shirred elastic back provide a familiar driver-glove fit. ASA sells this Memphis glove under SKU MEM3150 in a dozen pack containing 12 pairs.
Key Features
- Split cowhide leather construction
- Fleece interior for warmth
- Shirred elastic back
- Color-coded hem for size identification
Common Uses and Applications
- General outdoor material handling
- Warehouse and loading tasks
- Grounds maintenance in cool weather
- Construction support after hazard assessment
Leather Construction and Fleece Comfort
The 3150 uses Select B grade split cow leather rather than a grain leather shell. Its red fleece lining adds insulation for cooler working conditions. A gathered elastic back helps hold the glove around the hand, while the open cuff allows convenient removal between tasks.
Check fit while gripping the actual tools or materials used on the job. Fingers should move freely without excessive loose material at the tips. Select a size that accommodates the lining without restricting movement, and check the cuff alongside jacket sleeves.
Protection Limits and Cold-Weather Selection
MCR Safety's current product information and specification sheet do not list a numerical ANSI cut rating, impact rating, EN 511 cold classification or minimum working temperature for this model. Leather construction and fleece insulation alone do not establish those performance levels.
Evaluate wind, moisture, contact surfaces, workload and exposure duration when choosing gloves for cold conditions. Do not treat this fleece-lined style as a guarantee of safe freezer exposure. Use warming breaks and dry replacement gloves as needed. Confirm additional protection whenever sharp edges, chemicals or other hazards are present.
OSHA Hand Protection Requirements
OSHA 29 CFR 1910.138 requires employers to select suitable hand protection for identified hazards, including abrasions and harmful temperature extremes. Selection must consider glove performance, tasks, conditions and duration of use. The regulation does not constitute OSHA approval of this glove.
Inspection, Care and Manufacturer Documents
Keep model numbers with your purchasing records. Inspect leather, seams, lining and cuffs before use. Replace gloves when holes, wear, contamination or damaged stitching affect their suitability. Follow MCR Safety's care guidance rather than assuming a washing method is appropriate. Recheck grip whenever the glove or work surface becomes wet.
Review the MCR Safety 3150 specification sheet (PDF). Compare cold weather work gloves when you need different insulation, cuff coverage or documented protection ratings.
FAQ: Memphis Fleece-Lined Driver Gloves
How many gloves are included?
One dozen contains 12 pairs, or 24 individual gloves.
Do these have foam insulation?
The manufacturer specifies red fleece lining, without a foam layer.
Are these waterproof?
A waterproof barrier is not documented for model 3150.
Are these cut-rated gloves?
No numerical cut rating is listed in the reviewed manufacturer documentation.
