30" Cowhide Leather Welding Jacket – Kevlar® Stitched, Snap Front, Full Sleeve Coverage
The leather welding jacket provides full-sleeve coverage for welding, cutting and metal fabrication. ASA lists this 30-inch brown cowhide jacket with Kevlar stitching, a snap front and plated rust-resistant hardware. A chest pocket and soapstone sleeve pocket keep marking tools within reach during shop work.
ComfortSafe / Q1ASA
30 inches
Brown cowhide leather
Kevlar thread
Chest and soapstone sleeve pockets
M, L, XL, 2XL and 3XL
Key Features
- Leather body and sleeves provide coverage across the torso and arms.
- Kevlar stitching reinforces the jacket’s sewn construction.
- Snap-front closure allows the jacket to be secured over work clothing.
- Plated hardware and dedicated pockets suit routine shop handling.
Common Uses
- MIG and stick welding, subject to the task’s exposure assessment.
- Torch cutting, grinding and steel fabrication.
- Shipyard, automotive and industrial maintenance work.
- Municipal repair shops and supervised welding training.
Choosing Coverage and Fit
Select a welding jacket by the expected sparks and spatter, work position, duration and required body coverage. Full leather and hybrid jackets offer different coverage and comfort characteristics; material alone does not establish a protection rating or prove that one jacket is suitable for every welding process.
Check sleeve reach and torso coverage while bending and extending the arms. Allow room for appropriate clothing underneath without leaving loose openings that can collect sparks. Use the Size Chart tab as general guidance and confirm fit before issuing jackets to a crew.
OSHA Welding Clothing Requirements
OSHA 1910.252(b)(3) requires protective clothing suited to the size, nature and location of welding work. OSHA 1910.132 addresses hazard assessment, PPE selection and training. These are employer requirements, not an OSHA certification of this jacket.
No arc rating, temperature rating or EN ISO 11611 classification is established for this listing. Do not treat leather or Kevlar stitching as proof of those ratings. Select the necessary helmet, eye protection, welding gloves and additional body protection for the task. Inspect the jacket for holes, damaged seams and failed closures, and follow the supplied care instructions.
FAQ
Is this jacket flame-proof or arc-flash rated?
No flame-proof claim or verified arc rating is provided. Use documented, task-appropriate PPE when an electrical arc-flash rating is required.
Does a 30-inch jacket cover every working position?
No. Check coverage on the wearer in the actual work position. Additional protection may be needed where the jacket leaves areas exposed.
Can it replace welding gloves and a helmet?
No. A jacket protects a different body area. Select a complete set of PPE based on the workplace assessment.
