Georgia Boot G109 Homeland Waterproof 600G Insulated Work Boots
Georgia Boot G109 Homeland work boots combine the Georgia Waterproof System with 600 grams of 3M Thinsulate Ultra insulation. The 8-inch lace-up upper pairs full-grain leather with 900-denier CORDURA fabric. A steel shank, TDC polyurethane insole, and direct-attached oil-resistant PVC outsole complete this soft-toe boot. Sold as one pair.
Choose this insulated waterproof work boot for cold, wet tasks where protective toe caps are not required. Check fit with the socks you intend to wear, and match the footwear to the working surface and identified hazards before assigning it to a crew.
Quick Buying Details
Key Features
- Georgia Waterproof System.
- 600 g insulation for cold-weather use.
- Leather and CORDURA upper.
- Steel shank for arch support.
- TDC insole with air channels.
Common Uses and Applications
- Outdoor maintenance and property work.
- Agricultural and facility tasks.
- Cold, wet material handling.
- Work areas permitting soft-toe footwear.
Foot Protection and OSHA Requirements
G109 is a soft-toe model. It does not provide protective toe-cap performance for falling or rolling objects. A steel shank supports the boot; it does not establish a safety-toe or puncture-resistance rating.
OSHA 29 CFR 1910.136 requires suitable protective footwear where specified foot hazards exist. OSHA 1910.132 addresses hazard assessment, fit, training, and damaged PPE. No ASTM safety-toe, EH, or puncture rating is claimed for this model.
If your workplace requires protective toes, compare Oliver 45680C composite-toe work boots with the complete footwear specification. Neither insulation nor waterproof construction replaces the required hazard-specific protection.
Insulation, Traction, and Fit
The 600 g insulation value is not a guaranteed comfort-temperature rating. Warmth depends on activity, exposure time, socks, fit, moisture, and environmental conditions. Avoid sizing assumptions based only on insulation thickness.
Oil resistance describes an outsole property; it does not establish slip-proof footing or chemical protection. Assess traction on the actual surface, keep the tread clear, and replace footwear when wear compromises its suitability.
Select from ASA’s current size options and verify fit before work. Check heel retention, toe room, and lacing adjustment with work socks. Specify style G109 and quantities in pairs for repeat orders. Reassess footwear requirements when duties or conditions change.
Care and Manufacturer Information
Inspect the upper, laces, lining, and sole attachment. Follow manufacturer cleaning and drying guidance. Georgia Boot states that G109 is intended for severe wet conditions and is made with PFAS chemicals.
FAQ
- Is G109 a safety-toe boot? No. It is soft toe.
- How much insulation does it contain? 600 grams of 3M Thinsulate Ultra.
- Does it use GORE-TEX? The specified waterproofing is the Georgia Waterproof System.
- What is the outsole material? Oil-resistant PVC.
- Does it contain PFAS? Yes, according to Georgia Boot.
- How tall is this boot? Eight inches.
