Georgia Boot GB00085 Waterproof Wellington Work Boots
Georgia Boot GB00085 Suspension System Wellington work boots feature an 11-inch brown full-grain leather upper with pull straps and the Georgia Waterproof System. Inside, a removable CC5 Comfort Core polyurethane insole, mesh lining, and steel shank provide cushioning and support. This soft-toe pull-on boot is sold as one pair.
The polyurethane Suspension Outsole includes suspended center lugs and abrasion-resistant Pivot Pods. Georgia Boot describes it as oil and slip resistant. Choose this waterproof Wellington for farm, ranch, and outdoor work where soft-toe footwear meets the workplace requirements.
Quick Buying Details
Key Features
- Leather upper with pull straps.
- Waterproof construction.
- Removable insole and mesh lining.
- Steel shank for arch support.
- Suspension Outsole with Pivot Pods.
Common Uses and Applications
- Farm and ranch tasks.
- Agriculture and property maintenance.
- Wet outdoor work environments.
- General work permitting soft-toe boots.
Soft Toe and OSHA Foot Protection
GB00085 does not have a protective safety toe. It is not a substitute for rated impact or compression protection where falling or rolling objects threaten the feet. A steel shank does not establish a puncture-resistant sole or electrical-hazard rating.
OSHA 29 CFR 1910.136 requires protective footwear where specified foot hazards exist. OSHA 1910.132 addresses hazard assessment, fit, training, and damaged PPE. Select footwear against the workplace specification; these requirements do not certify models.
Fit, Traction, and Waterproofing
Select from ASA’s sizes and confirm the supplied width before ordering. Check heel retention, toe room, and shaft fit with work socks. A pull-on boot should remain secure during the movements required by the job without restricting circulation or causing pressure.
Oil and slip resistance do not guarantee footing on every surface. Keep tread clear and assess contaminants, slopes, and housekeeping conditions. Waterproof construction does not establish chemical protection or permit water to enter over the boot opening without wetting the interior.
If your task requires insulation, compare Georgia Boot G109 Homeland insulated work boots. Verify temperature needs and toe-protection requirements rather than treating all waterproof boots as interchangeable.
Care and Manufacturer Information
Inspect the leather, lining, pull straps, tread, and sole attachment before use. Follow Georgia Boot cleaning and drying guidance; replace damaged footwear. Recheck fit and performance when work conditions change.
The manufacturer states this product is intended for severe wet conditions and is made with PFAS chemicals. Review the official Georgia Boot GB00085 product information for construction and disclosures.
FAQ
- Does it have a safety toe? No. GB00085 is soft toe.
- How tall is the boot? Eleven inches.
- Is the insole removable? Yes, the CC5 Comfort Core polyurethane insole is removable.
- Is the outsole slip-proof? No. Slip resistance does not eliminate slip risk.
- Does this model contain PFAS? Yes, according to Georgia Boot.
- How is it sold? As one pair.
