18-Inch FR Cotton Welding Sleeves – Green Sateen, Elastic Cuffs, Pair
These 18-inch flame-retardant cotton welding sleeves provide separate arm coverage for light-duty welding and associated shop tasks. The green sateen design has elastic cuffs and is sold by the pair. Choose sleeves when the exposure assessment permits arm protection to be selected separately from the clothing covering the torso.
S64054950
18 inches
FR cotton sateen
Green
Elastic
One pair
Key Features
- Separate sleeves cover the arms without adding a second torso garment.
- Elastic cuffs help position the sleeves over appropriate clothing.
- Pair packaging provides a sleeve for each arm.
- Listed for light-duty welding use, subject to the task assessment.
Common Uses & Applications
- Light-duty welding and fabrication with suitable overall coverage.
- Shop maintenance and repair tasks with assessed spark exposure.
- Supervised welding programs and contractor maintenance crews.
Arm Coverage and Fit
Check that sleeve length and cuff fit provide the required coverage while reaching and bending. Arrange the sleeves with welding gloves so gaps do not open at the wrists. Sleeve protection does not extend to the chest, back, neck or legs; those areas require separate clothing where exposed.
Selecting FR Cotton or Leather Sleeves
Compare the documented protection, fit and coverage of the exact products. FR cotton and leather differ in construction, but the material name alone does not establish a safe amperage, spatter exposure or contact temperature. If clothing is being damaged during the task, stop and reassess the exposure and PPE selection.
FR Claims and Care
Flame-retardant does not mean flameproof. No matching test report, arc rating or maximum wash count has been confirmed for this exact SKU. Follow the supplied garment label for cleaning and inspect cuffs, fabric and seams before use. Replace sleeves that are torn, burned or cannot be cleaned adequately.
Applicable Welding Safety Requirements
OSHA 1910.252(b)(3) requires protective clothing appropriate to the size, nature and location of welding work. OSHA 1910.132 covers hazard assessment, PPE selection, fit and training. These workplace rules do not provide an OSHA product certification.
ASTM D6413 is a vertical-flame fabric test, not an arc rating. A matching manufacturer document is needed before treating an ASTM claim as verified for these sleeves. They should not be selected as electrical arc-flash PPE without the required documented rating.
Compare leather welding sleeves or a welding jacket when reviewing material and coverage options.
FAQ
Are these supplied as a pair?
Yes. ASA lists one pair of 18-inch sleeves.
Can they replace a welding jacket?
Only arm areas are covered. Required torso protection must be provided separately.
Is an arc rating available?
No verified arc rating is provided for this SKU. FR wording alone does not establish arc-flash protection.
