DEWALT D100P Twin Personal SRL, 6 ft, Steel Snap Hooks
The DEWALT D100P DXFP240212-006 twin personal self-retracting lifeline combines two 6 ft web lifelines with steel snap hooks and a harness connector. Its retracting lines help manage slack during movement, while the twin configuration supports continuous attachment during properly planned anchor transitions. High-impact polymer housings protect the mechanisms and recessed labels.
DEWALT / DXFP240212-006
Twin personal SRL
6 ft per line
Dyneema webbing
Steel snap hooks
ANSI Z359.14-2021 Class 1
130–310 lb, including equipment
Key Features
- Twin lines for controlled anchor transitions
- Steel snap hooks with 3,600 lb gate ratings
- Polymer housings and recessed labels
- Impact indication for inspection
Common Uses & Applications
- Overhead anchorage systems on construction sites
- Industrial maintenance at height
- Transfers between approved compatible anchor points
Selection and System Compatibility
Use only with anchorage at or above the user’s dorsal D-ring as required for this Class 1 model. Plan clearances and swing-fall control before work. During transitions, keep one approved connection secure before releasing the other and follow the twin-SRL instructions. This standard snap-hook version is not the tie-back model; do not wrap it around a structure and clip back to the webbing.
Manufacturer-Listed Standards
DFP lists ANSI Z359.14-2021 Class 1 Personal. Its ANSI range is 130–310 lb and its OSHA-use range is 130–420 lb, including tools and equipment, subject to manual conditions. This model is not presented for foot-level or leading-edge applications. Do not infer Class 2 capability from the twin design.
Inspection and Safety
Read the instructions before use. Inspect equipment before each use, remove damaged or fall-loaded equipment from service, and arrange prompt rescue. Follow applicable OSHA construction fall-protection requirements or general-industry personal fall-protection requirements.
Manufacturer Documents
FAQ
Is this SRL suitable for leading-edge use?
No leading-edge approval is established for this Class 1 model. Select equipment specifically rated for the intended edge exposure.
Are tie-back hooks supplied?
No. This configuration uses standard steel snap hooks.
