DEWALT D1000 Fall-Protection Kit — Pass-Through Legs
The DEWALT DXFP110001 fall-protection kit pairs a universal-size D1000 harness with a 6 ft internal energy-absorbing lanyard and a handled storage bucket. The harness uses pass-through leg connections and five adjustment points. This package is intended for connection to a separately selected, suitable anchorage; an anchor is not included in the published kit contents.
DEWALT / DXFP110001
DXFP512001, universal size
Pass-Through
DXFP612111, 6 ft single leg
Steel snap hooks at both ends
Handled bucket
Not included
Key Features
- Five-point harness adjustment
- Lanyard with internal energy absorber
- Steel snap-hook connectors
- Bucket keeps components together between jobs
Common Uses & Applications
- Construction fall-protection programs
- Industrial maintenance with a suitable anchor
- Crew equipment issue and storage
Selection and System Compatibility
Choose the buckle style that suits the workforce and inspection routine. Fit the harness to each user, verify connector compatibility and calculate clearance using the lanyard instructions. A 6 ft lanyard requires more space than its nominal length once deceleration, harness movement and safety margin are considered. Do not use the lanyard for tie-back unless its instructions expressly permit that connection.
Manufacturer-Listed Standards
DFP’s kit page identifies ANSI Z359.11-2021 for the harness and Z359.13-2013 for the lanyard. It lists 310 lb ANSI and 420 lb OSHA-use ratings; verify the supplied component labels and instructions before selecting user capacity. These ratings do not replace inspection, clearance planning or employer fall-protection duties.
Inspection and Safety
Read the instructions before use. Inspect equipment before each use, remove damaged or fall-loaded equipment from service, and arrange prompt rescue. Follow applicable OSHA construction fall-protection requirements or general-industry personal fall-protection requirements.
Manufacturer Documents
FAQ
Does this kit include an anchorage connector?
No anchor is listed. Provide a compatible, suitable anchorage separately.
Can the lanyard maintain continuous connection while changing anchors?
It is a single-leg lanyard. Use an appropriate system and procedure if continuous attachment during transfers is required.
