3M 60926 multi-gas/vapor P100 cartridges, pair
The 3M 60926 combines a multi-gas/vapor cartridge with a P100 particulate filter for approved 3M reusable respirator assemblies. ASA supplies two cartridges under SKU S60926. Select this pair when the assessed exposure calls for its specified chemical coverage and particulate filtration. The respirator facepiece is purchased separately.
Key features
- Combined chemical cartridge and particulate filter.
- 99.97% minimum particulate filtration efficiency.
- Quarter-turn bayonet installation.
- Swept-back shape supports visibility and balance.
Applications
Subject to contaminant identification and exposure assessment:
- Selected chemical processing tasks.
- Industrial maintenance involving covered gases.
- Manufacturing with combined vapor and particulate exposures.
- Assessed utility and process operations.
Match coverage to the contaminant
3M lists certain organic vapors, chlorine, chlorine dioxide, hydrogen chloride, hydrogen fluoride, hydrogen sulfide, sulfur dioxide, ammonia, methylamine, and formaldehyde. Multi-gas does not mean every gas or chemical mixture. Confirm each substance, concentration, and approved respirator configuration before use.
P100 describes particulate filtration under certification test conditions. It does not extend the cartridge's gas coverage or guarantee the same protection for every wearer. Unlike the 6006 gas/vapor cartridge, 60926 includes the particulate filter.
For repeat orders, record model 60926 with the assigned respirator and workplace change schedule. Check incoming packaging and expiration dates before issuing a replacement pair. Store unopened cartridges in a cool, dry place, and keep cartridges and respirators away from contaminated areas between uses. Storage does not reset a cartridge already in service.
Check facepiece compatibility
Use with approved 3M bayonet respirators, including applicable 6000, 6500, 7500, and FF-400 models. Check the exact facepiece and cartridge combination against its NIOSH approval label. Secure Click respirators use a different connection system.
Exposure limits depend on the facepiece, fit test, contaminant, and applicable standard. A full facepiece does not automatically permit use at 50 times the permissible exposure limit; that limit requires quantitative fit testing and remains subject to lower regulatory or IDLH limits.
Review the 3M combination cartridge/filter user instructions covering model 60926 before assembly and use.
3M 60926 FAQ
Are these OSHA approved?
NIOSH approves respirator assemblies. OSHA sets workplace selection and use requirements; purchasing this cartridge alone does not establish compliance.
Can these cartridges be cleaned?
No. Do not wash, vacuum, or use compressed air on them. Follow 3M's storage and disposal instructions.
