3M 6001 Cartridges - 2-Pack
3M 6001 organic vapor cartridges help protect against certain organic vapors when used with a compatible facepiece in a complete NIOSH-approved respirator configuration. This listing includes one pair: two cartridges for a dual-cartridge respirator. The bayonet connection and swept-back profile support straightforward installation and a clear field of view.
Model 6001 is an organic vapor cartridge, not a particulate filter. It does not filter dust, mist, or other airborne particles by itself. Match the complete respirator assembly to the contaminant, concentration, and task before purchase.
Quick Buying Details
Key Features
- Swept-back cartridge profile.
- Quarter-turn bayonet attachment.
- Lightweight design with low breathing resistance.
- Pair packaging for compatible dual-cartridge facepieces.
Common Uses and Applications
- Assessed solvent-handling tasks.
- Adhesive and coating operations.
- Chemical manufacturing and maintenance.
- Industrial cleaning with identified organic vapors.
Application names alone do not establish suitability. Spraying can introduce particulates that require additional approved filtration.
Respirator Compatibility
3M lists specified 6000, 6500, 7500, 7800S, and FF-400 Series facepieces, plus certain Scott AV-3000 configurations. Scott configurations require the specified AV-632 adapter. Confirm the exact combination on the current approval label and facepiece instructions; a matching connector alone is insufficient.
OSHA Respiratory-Protection Requirements
OSHA 29 CFR 1910.134 requires a written respiratory-protection program where respirators are necessary. Requirements include hazard evaluation, appropriate selection, medical evaluation, fit testing for tight-fitting respirators, and training. NIOSH approval applies to the approved assembly; it does not replace workplace selection.
Under 1910.134(d)(3)(iii)(B)(2), employers using gas/vapor cartridges without an appropriate end-of-service-life indicator must establish a change schedule using objective information or data. Do not wait for odor or taste as the routine replacement signal. Leave the contaminated area immediately if breakthrough or distress occurs.
For repeat purchasing, specify model 6001 and order quantities in pairs. Keep cartridge selection consistent with the facility’s approved respiratory-protection program, and review suitability whenever workplace chemicals or processes change.
Use, Storage, and Documentation
Do not use in oxygen-deficient, IDLH, or unknown-concentration atmospheres. These cartridges do not supply oxygen. Follow exposure limits and all assembly instructions. Store away from contamination, check expiration dates, and do not wash cartridges.
Read the official 3M 6000 Series cartridge instructions, including 6001 (PDF). Confirm product details on the 3M 6001 manufacturer page.
FAQ
- Is a facepiece included? No. This listing supplies two cartridges.
- Does 6001 include P100 filtration? No. Particulate protection requires an approved filter combination.
- How often should cartridges be replaced? Follow the employer’s documented change schedule; there is no universal replacement interval.
- Will these fit every 3M respirator? No. Verify the exact facepiece and approved assembly.
- Can cartridges be cleaned and reused? Do not wash or attempt to regenerate them.
- What if both vapors and particles are present? Compare 3M 60921 organic vapor/P100 cartridges, subject to hazard assessment and approved compatibility.
