Nitrile Palm-Coated Work Gloves
Cordova 6850R nitrile-coated work gloves combine a semi smooth-rough particle finish with jersey lining and a 2.5-inch safety cuff. The supported construction uses fabric beneath the nitrile coating, providing a heavier work-glove option for material handling and assembly. ASA supplies these gloves in Large, sold by the dozen with 12 pairs per order unit.
Quick Buying Details
Key Features
- Rough nitrile finish for gripping contact.
- Jersey lining supports the outer coating.
- Heavyweight construction for general work tasks.
- Safety cuff extends coverage at the wrist.
Common Uses and Applications
- Automotive assembly and parts handling.
- Warehouse and general material handling.
- Plumbing and maintenance tasks.
- Fabrication support work after hazard assessment.
Choosing the Right Coated Glove
The 6850R has a rough palm finish; the separate 6850 model has a smooth finish. Select this rough version when the task calls for textured contact with tools or parts. Check grip with the actual object and surface contamination involved. Neither nitrile material nor a rough finish guarantees secure handling of every oily component.
Palm coating does not create a sealed, fully coated glove. Avoid treating the fabric back or cuff as a liquid barrier. If chemicals can contact the hands, obtain glove-specific compatibility data for the concentration, temperature and exposure duration. Compare unlined nitrile chemical gloves when evaluating a different construction; each option still requires an exposure assessment.
Safety Standards and Limitations
OSHA 29 CFR 1910.138 requires employers to select hand protection according to performance, workplace hazards, task conditions and duration of use. It does not certify these gloves.
The linked sheet does not give numerical ANSI cut, puncture or abrasion ratings. Do not select this glove for sharp edges or puncture hazards without suitable performance documentation. Its component materials meet the manufacturer's food-contact statement under 21 CFR Parts 170–199; facility hygiene requirements still apply.
Fit and Ordering
Check that fingers can move freely without excess material interfering with the task. Test tool control before assigning the glove to a crew. Plan orders in pairs: two single-dozen order units supply 24 pairs. Keep replacement gloves accessible so workers can change damaged pairs promptly.
Care and Manufacturer Documentation
Inspect the coating, lining and seams before use. Replace damaged gloves. The manufacturer permits detergent washing in warm water up to 50°C/122°F, then air drying or low-heat tumble drying. Washing does not establish chemical decontamination.
FAQ
- How many gloves are included? One dozen contains 12 pairs, or 24 individual gloves.
- Are these fully coated gloves? No. The manufacturer identifies the 6850R as palm coated, with jersey lining and a safety cuff.
- Is this a cut-rated glove? The linked specification sheet provides no ANSI cut rating. Choose documented cut protection when required.
- Which size does ASA offer? This listing currently offers Large. Select the listed size before ordering.
