MSA V-Gard camouflage full brim hard hat
The MSA V-Gard camouflage full brim hard hat combines a printed camo design with Type I industrial head protection and an adjustable Fas-Trac suspension. Manufacturer part number 10104254 identifies the full brim camouflage model; ASA lists it under SKU S10104254.
This Freedom Series hard hat has a polyethylene shell and a brim extending around the head. It is a choice for buyers who want camouflage graphics while selecting head protection for their workplace requirements. ASA lists Type I, Class E protection. Confirm the supplied helmet's approval label before use.
Key features
- Camouflage graphics from the Freedom Series.
- Full brim shape around the shell.
- Non-vented polyethylene construction.
- Ratchet adjustment for setting headband fit.
- Type I protection for top impact hazards.
- Identifiable MSA part number for repeat orders.
Workplace applications
For work where the hazard assessment permits this helmet's protection type and configuration:
- Construction and contractor operations.
- General industrial work.
- Plant maintenance and turnaround work.
- Oil and gas facility operations.
Understand Type I before choosing a brim style
Type I describes protection intended to reduce the force of impacts to the top of the head. Type II includes lateral impact protection as well. The brim shape does not change that distinction. A full brim extends around the helmet, but it does not make a Type I hard hat equivalent to a Type II helmet.
Start with the hazards and requirements of the task, then choose the style and graphics. If your employer requires Type II protection, select an appropriately marked Type II product. The camouflage finish is an appearance choice and does not replace a workplace requirement for conspicuous headwear or other visibility measures.
Full brim coverage and suspension fit
A brim around the shell offers a different profile from a front-brim cap. Consider that shape when checking clearance around your work area and when combining head protection with other equipment. The brim does not replace safety glasses, a suitable face shield, hearing protection, or any other required PPE.
The Fas-Trac ratchet lets the wearer adjust the headband. Follow the supplied fitting instructions and check the complete helmet before starting work. For a replacement order, confirm the suspension model fitted to your current helmet instead of assuming every V-Gard suspension or accessory is interchangeable.
Check accessory compatibility before ordering
Send ASA the exact model numbers of any earmuffs, face shield frame, chin strap, or other accessory you intend to use. Ask for confirmation of the complete combination with MSA part 10104254. Similar product names and matching colors are not enough to establish compatibility.
If you are replacing only one component, identify both the shell and suspension. Keep the manufacturer instructions with your equipment records so maintenance staff can check the correct replacement parts. Do not drill the shell or improvise mounts to attach an accessory that was designed for another helmet.
Inspection, cleaning, and replacement
Inspect the shell and suspension before use and during the workday. Look for damage, deterioration, or components that no longer function correctly. Remove a damaged helmet from service. A helmet subjected to a severe impact should be replaced even when damage is not obvious.
Use mild soap and water for routine cleaning, following MSA's instructions. Avoid petroleum solvents and harsh cleaning chemicals. Store the helmet away from direct sunlight and damaging exposures. Follow the applicable replacement guidance; a calendar interval does not override damage, wear, or a severe impact.
Crew purchasing and repeat orders
MSA camouflage full brim hard hat FAQ
What is the difference between the SKU and part number?
S10104254 is ASA's ordering SKU. The manufacturer part number is 10104254. Include both when requesting a quote so the camouflage full brim model is clearly identified.
Does full brim mean protection from every direction?
No. Full brim describes the shell's shape. This is a Type I hard hat for top impact protection. Choose Type II head protection when lateral impact protection is required.
Can this hard hat be worn backward?
MSA permits reverse wearing only for helmets marked for reverse donning and configured according to its instructions. Check the actual helmet marking and instructions before changing the wearing orientation.
Can I add a company logo to the camouflage finish?
Ask ASA to confirm available decoration options for this exact model before ordering. Provide artwork, preferred location, and quantity. Follow MSA's guidance for any labels or markings; do not assume a paint, adhesive, or printing process is suitable for the shell.
What should a purchasing team check on receipt?
Match the delivered product to the purchase order, inspect its condition, and retain the supplied instructions. Confirm the shell markings and suspension configuration before issuing it. Record any accessories separately so future replacements can be matched to the approved combination.
