Microflex Dura Flock DFK-608 Nitrile Gloves
Microflex Dura Flock DFK-608 nitrile gloves combine a moisture-absorbing flock lining with a fully textured exterior for industrial handling tasks. The thin inner lining helps manage moisture inside the glove, while the extended cuff provides additional coverage. Each box contains 50 disposable gloves. Choose this model when lining comfort and a robust nitrile construction suit the job.
Key Features
- A thin flock lining absorbs moisture for wearing comfort.
- Full surface texture supports handling tools, parts, and components.
- An extended, beaded cuff adds coverage beyond the hand.
- Nitrile construction is not made with natural rubber latex.
- Green color helps distinguish this glove from other disposable supplies.
Applications
Ansell recommends DFK-608 for general automotive aftermarket work, production line support and maintenance, and component assembly and inspection. Confirm suitability for the actual exposure. Splash protection requires checking the specific liquid, concentration, contact duration, and manufacturer compatibility information.
Choose the Right Glove and Size
When comparing options, separate comfort features from protection requirements. A moisture-absorbing lining can matter during handling work, but it cannot substitute for the correct chemical barrier. Keep the model and size on purchasing records so a similarly named glove is not substituted without a review.
Select Medium, Large, or XL from this listing. Check finger reach and handling control before choosing sizes for a team. For repeat orders, specify DFK-608-M, DFK-608-L, or DFK-608-XL alongside ASA SKU S608. The box count refers to individual gloves, not pairs. Compare other disposable gloves when you need a different material, cuff length, or protection profile.
Applicable Standards and OSHA Requirements
Ansell lists EN ISO 21420:2020 for general protective-glove requirements and EN 421:2010 for radioactive contamination. The contamination classification concerns a barrier to radioactive material; it does not establish shielding against ionizing radiation. Select specialized protection through the applicable radiation-safety program.
The data sheet reports 2.5 AQL for freedom from holes, with ASTM D5151 and EN 455-1 as test methods. A test-method reference does not, by itself, establish medical examination clearance or compliance with every requirement of a medical-glove standard.
OSHA 29 CFR 1910.138 requires glove selection based on protective performance, tasks, conditions, duration of use, and identified hazards. OSHA 1910.132(d) requires workplace hazard assessment and properly fitting PPE. These are employer requirements, not OSHA product approval.
Manufacturer Specification Sheet
Download Ansell MICROFLEX Dura Flock DFK-608 Technical Data Sheet (PDF)
Individual product document covering materials, current thickness values, standards, packaging, and storage. Check the specification applicable to your supplied stock if replacing an older version.
FAQ – DFK-608
What does flock-lined mean?
The glove has a thin, soft inner lining that absorbs moisture. It is a comfort feature, not a promise that hands will remain dry for a fixed wearing period.
Are Dura Flock gloves latex-free?
Ansell states that DFK-608 is not made with natural rubber latex. That does not establish that every wearer will be free from sensitivity to other glove ingredients.
How many gloves are in a manufacturer case?
Ansell lists ten boxes of 50 gloves, totaling 500 gloves per case. This listing’s box contains 50 gloves.
Where can I review manufacturer documentation?
See Ansell’s current DFK-608 product page and the official Ansell technical data sheet PDF. The current sheet lists typical palm thickness of 0.29 mm / 11.4 mil and finger thickness of 0.33 mm / 13.0 mil. Older literature differs; confirm the specification applicable to your supplied stock when thickness is a purchasing requirement.
