MicroFlex Diamond Grip Plus Latex Work Gloves – Textured Grip

Microflex
SKU:
DGP350
$12.89
(No reviews yet)
With their ergonomic fit and premium latex material, these single-use gloves are designed for long-lasting comfort and efficiency. Available in boxes of 100, they are an economical and dependable solution for professionals in life sciences, healthcare, food processing, and equipment maintenance.
Fixed Shipping Cost:
$8.95
Current Stock:
Adding to cart… The item has been added

Microflex Diamond Grip Plus DGP-350 Latex Exam Gloves

Microflex Diamond Grip Plus latex gloves combine a fully textured surface with the stretch and sensitivity of natural rubber latex. The DGP-350 is a powder-free, nonsterile examination glove for tasks requiring controlled handling. Each box contains 100 gloves. Choose this model when latex is appropriate for your workplace and the task calls for disposable hand protection.

Brand / ModelMicroflex / DGP-350
ASA SKUDGP350
MaterialNatural rubber latex
Box Quantity100 gloves
ASA SizesSmall, Medium, Large, XL
Palm Thickness0.14 mm / 5.51 mil
Finger Thickness0.17 mm / 6.69 mil
Overall Length245 mm / 9.65 inches
Manufacturer-Listed StandardsAnsell lists ASTM D3578, EN ISO 21420:2020, food-contact compliance with 21 CFR 177.2600, and medical examination grade status.

Key Features

  • Full surface texture supports handling in wet and dry conditions.
  • Elastic latex follows hand movement during detailed work.
  • Powder-free construction avoids added glove powder.
  • A beaded cuff finishes the wrist opening.
  • Natural color and standard cuff length identify this version.

Applications

Ansell identifies standard patient examinations, sample collection and processing, food handling, and equipment maintenance as applications. Select gloves against the actual exposure, facility procedures, and latex restrictions. An application listing does not establish resistance to every disinfectant, solvent, or laboratory chemical.

Choose the Right Size and Material

Match the DGP-350 model and size when replenishing supplies. Check finger reach and hand movement before assigning a size across a team. The box quantity refers to individual gloves, not pairs. Manufacturer case packaging contains ten boxes, totaling 1,000 individual disposable gloves. Compare other disposable gloves when your facility requires a different material or protection profile.

For purchasing records, keep ASA SKU DGP350 separate from the manufacturer’s size-specific ordering code. Ansell uses DGP-350-S, DGP-350-M, DGP-350-L, and DGP-350-XL for the sizes offered here. This distinction helps purchasing teams specify the same glove and size on repeat orders without relying on the Diamond Grip name alone.

Safety Standards and Glove Selection

Ansell lists ASTM D3578 for rubber examination gloves and EN ISO 21420:2020 general protective-glove requirements. These standards do not establish resistance to every chemical or drug. The product remains nonsterile and is not listed as tested for chemotherapy drugs.

OSHA 29 CFR 1910.138 requires hand protection selection based on glove performance, the task, working conditions, exposure duration, and identified hazards.

Where occupational exposure to blood or other potentially infectious materials is anticipated, OSHA 1910.1030(d)(3)(ix) addresses glove use and replacement. Replace disposable gloves when contaminated or when their barrier is compromised; do not wash or decontaminate them for reuse. These are workplace requirements, not OSHA product approval.

Manufacturer Specification Sheet

Download Ansell MICROFLEX Diamond Grip Plus DGP-350 Technical Data Sheet (PDF)

Individual product document covering materials, thickness, length, standards, packaging, and storage.

FAQ – DGP-350

How should unopened boxes be stored?

Ansell’s data sheet specifies a cool, dry location away from direct sunlight, ozone, and ignition sources. Keep the packaging available so staff can check the model, size, and manufacturer labeling before use. Follow any additional storage directions supplied with your actual shipment.

Can these gloves be used for food contact?

Ansell lists food-contact compliance with 21 CFR 177.2600. Follow your operation’s hygiene procedures and any restrictions on latex gloves.

Are Diamond Grip Plus gloves nitrile?

No. DGP-350 uses natural rubber latex. Select a separately identified nitrile product when latex must be avoided.

Where can I review manufacturer specifications?

Check Ansell’s current DGP-350 specifications for thickness and standards. The official Ansell technical data sheet PDF provides product specifications, standards, packaging, and storage instructions.

With their ergonomic fit and premium latex material, these single-use gloves are designed for long-lasting comfort and efficiency. Available in boxes of 100, they are an economical and dependable solution for professionals in life sciences, healthcare, food processing, and equipment maintenance.
General men's apparel, women's apparel and glove size chart. Read the measurements and tall/short adjustments in the text version below.
Read size chart measurements (text version)

This is the general size chart shown above. Use the specific product or manufacturer's size guide when provided.

Men's sizes — chest, waist, sleeve and inseam measurements are in inches.

  • XS: chest 30–32; waist 26; sleeve 31; inseam 29.
  • S: chest 34–36; waist 28–30; sleeve 32; inseam 29½.
  • M: chest 38–40; waist 32–34; sleeve 33; inseam 30.
  • L: chest 42–44; waist 36–38; sleeve 34; inseam 30½.
  • XL: chest 46–48; waist 40–42; sleeve 35; inseam 31.
  • 2XL: chest 50–52; waist 44–46; sleeve 36; inseam 31½.
  • 3XL: chest 54–56; waist 48–50; sleeve 37; inseam 32.
  • 4XL: chest 58–60; waist 52–54; sleeve 38; inseam 32½.
  • 5XL: chest 62–64; waist 56–58; sleeve 39; inseam 33.

Women's sizes — dress-size equivalents: XS 2–4; S 6–8; M 8–10; L 12–14; XL 16–18; 2XL 20–22.

Glove sizes — hand-measurement ranges shown in the chart: S 7½–8; M 8½–9; L 9½–10; XL 10½–11. Follow the glove manufacturer's measuring instructions for the specific model.

Regular, tall and short sizing

  • Regular: men's height 5 feet 8 inches to 6 feet.
  • Tall: men's height 6 feet 1 inch to 6 feet 3 inches. Add 2 inches to inseam and 1 inch to sleeve length.
  • Short: men's height 5 feet 3 inches to 5 feet 7 inches. Subtract 2 inches from inseam and 1 inch from sleeve length.

Measurement diagram: The image marks chest and waist across the torso, sleeve along the arm, inseam along the inside leg, hand across the palm and foot from heel to toe. It does not include a shoe-size conversion.