Torq Hail Xtra SG9928 Cut and Impact Work Gloves
Skytec Torq Hail Xtra SG9928 gloves from Globus Global Safety combine ANSI A7 palm cut resistance with ANSI/ISEA 138 Level 3 impact protection. An orange AireFlex synthetic leather palm carries PVC grip dots over a Tuffalene UHMWPE liner. ASA SKU S9928 suits buyers selecting gloves for industrial handling where both cut and impact hazards are present.
Key Features
- TPR finger and knuckle protection
- Reinforced thumb crotch and fourchettes
- Touchscreen-compatible index finger
- Kevlar stitching and wrist pull tab
Common Uses and Applications
- Oil and gas operations
- Construction and demolition
- Metal fabrication and maintenance
- Manufacturing and utility work
Verified Mechanical Performance
The manufacturer specifies ANSI/ISEA 105-2016 cut level A7 on the palm, abrasion level 6 and puncture level 4. Reported test results are 4,842 grams under ASTM F2992-15 and 113 newtons for puncture. These measurements describe different hazards; puncture resistance does not establish needlestick protection.
Under ANSI/ISEA 138-2019, the knuckles, fingers/thumb and overall result are Level 3. The EN 388:2016+A1:2018 code is 4X42FP. Cut and impact ratings do not make gloves cut-proof or crush-proof. Keep hands clear of pinch points and moving equipment.
Grip, Coverage and Fit
The PVC dots add palm texture, while the stretch spandex back and wing thumb allow movement. The yellow/green back is water-repellent; this does not establish full-glove waterproofing or chemical resistance. Check grip with the actual tools and materials, particularly when oil or moisture is present.
Select the available size that fits securely without leaving excess material at the fingertips. Adjust the cuff so the glove stays seated without restricting movement. Test finger reach and tool control before starting work. Compare cut-resistant gloves and sleeves when additional coverage is required beyond the protected palm.
OSHA Hand Protection Requirements
OSHA 29 CFR 1910.138 requires employers to select appropriate hand protection based on identified hazards, performance, tasks, conditions and exposure duration. Product ratings support that assessment; they do not constitute OSHA approval. Choose separate documented protection where chemical, electrical or thermal hazards require it.
Inspection and Manufacturer Documentation
Check the palm, liner, stitching, closure and impact guards before use. Replace damaged gloves and follow the manufacturer's care instructions. Retain package identification when ordering replacements.
Download the SG9928 manufacturer specification sheet (PDF) for construction details and test results.
California warning: The manufacturer identifies cancer and reproductive harm risks from DEHP exposure. See P65Warnings.ca.gov.
FAQ: Torq Hail Xtra SG9928
Is A7 protection provided throughout the glove?
No. The manufacturer specifies A7 cut resistance on the palm only.
Are these Mechanix Wear M-Pact gloves?
No. This listing is for Torq Hail Xtra SG9928.
Can they operate touchscreens?
The index finger is touchscreen compatible. Check operation with your device.
Does oilfield use mean chemical protection?
No. Verify chemical compatibility separately for the substances and exposures involved.
