Hot Mill Gloves, 32 oz, Burlap Lined - Dozen
Cordova 2515G hot mill gloves combine a heavyweight, three-ply cotton palm with burlap lining for industrial handling. The green glove features quilting across the palm, thumb, and forefinger, plus a knuckle strap and band-top cuff. Available in Large, each dozen contains 12 pairs for facility and crew purchasing.
Cordova lists intermittent heat contact protection up to 300°F. This manufacturer statement applies to intermittent contact; it does not establish a safe holding time for every task. Evaluate contact duration, pressure, moisture, and the material being handled before selecting these cotton hot mill gloves.
Quick Buying Details
Key Features
- Heavyweight cotton construction with three-ply palm.
- Burlap lining and quilted gripping surfaces.
- Quilted thumb and forefinger.
- Knuckle strap and band-top cuff.
- Manufacturer-listed food-contact materials.
Common Uses and Applications
- Bakery handling tasks following heat assessment.
- Food-contact operations using clean gloves.
- Industrial equipment and material handling.
- Assessed intermittent contact with hot surfaces.
Heat Protection and Selection
Use the 300°F statement as one selection factor, together with workplace conditions. Keep gloves dry for hot handling. Do not infer flame resistance, welding suitability, molten-metal splash protection, chemical resistance, or electrical insulation from this temperature statement. No verified ANSI cut level is specified here for model 2515G.
Food-contact suitability concerns the glove materials. Keep gloves clean, follow facility hygiene procedures, and replace contaminated gloves when cleaning cannot restore their suitability. Separate food-handling gloves from gloves used around lubricants, chemicals, and dirty equipment.
OSHA Hand-Protection Requirements
OSHA 29 CFR 1910.138 requires appropriate hand protection for hazards including thermal burns. Employers must evaluate glove performance against the task, conditions, duration, and identified hazards. OSHA 1910.132 covers PPE assessment, fit, training, and damaged equipment. These are workplace requirements, not OSHA product certification.
Ordering for Your Facility
Order by the dozen and specify Cordova 2515G for repeat purchases. Check that Large provides a secure fit without restricting movement. Compare the three-ply palm, burlap lining, and band-top design with your approved glove specification before substituting this model for another mill glove in a work process.
Care and Manufacturer Documentation
Inspect the palm, seams, lining, and cuff before use. Replace torn, scorched, or excessively worn gloves. Cordova recommends commercial laundry detergent and water no hotter than 122°F, followed by air drying or low-heat tumble drying. Dry completely before returning gloves to service.
Review the Cordova 2515G manufacturer specification sheet (PDF) for construction, care, and packaging details.
FAQ
- What is the manufacturer code? Cordova 2515G.
- What temperature does Cordova list? Up to 300°F for intermittent heat contact.
- Are these welding gloves? Welding suitability is not established by this specification.
- Are they suitable for food contact? Cordova lists compliant component materials; maintain hygiene.
- What size is available? Large.
- How many pairs are included? Twelve pairs per dozen.
