Cotton String Knit Work Gloves - 10 Dozen
HandFortress cotton string knit work gloves offer a flexible, uncoated option for light-duty warehouse, packing, and sorting tasks. Made from a standard-weight, 7-gauge blend of 60% cotton and 40% polyester, these ambidextrous gloves provide breathable coverage for dry handling. Each pack contains 10 dozen, or 120 pairs, with Small and Large options available.
Choose these general-purpose knit gloves when the task calls for a fabric glove without a palm coating. Their construction allows either glove to fit either hand, simplifying distribution and replacement across workstations. Select the size that allows finger movement without loose material interfering with the job.
Quick Buying Details
Key Features
- Breathable polyester/cotton knit.
- Flexible construction for handling.
- Uncoated palm and fingers.
- Either-hand design.
- Bulk pack for facility use.
- Safe for food contact.
Common Uses and Applications
- Warehouse picking and packing.
- Shipping, receiving, and sorting.
- Light assembly and inspection.
- Food processing and dry packaging.
Choosing Uncoated or Coated Gloves
Uncoated cotton-blend gloves provide a fabric contact surface. Where slippery parts, sharp edges, or wet materials are present, evaluate a glove designed for those conditions. A coating can change grip and handling characteristics, but coating type alone does not establish chemical or cut protection.
For a coated alternative, compare latex palm-coated work gloves against the task requirements. Confirm materials, fit, and documented performance before substituting gloves in a PPE program.
OSHA Hand-Protection Requirements
OSHA 29 CFR 1910.138 requires employers to select hand protection based on glove performance, tasks, conditions, duration, and identified hazards. OSHA 1910.132 also requires workplace hazard assessment, suitable fit, and training where PPE is necessary.
These general-purpose gloves have no verified numerical cut, abrasion, impact, or heat rating provided here. Do not select them as chemical barriers, electrical insulating gloves, or protection from sharp edges or hot surfaces. OSHA requirements guide workplace selection; they do not certify this product.
Inspection, Reuse, and Ordering
Check gloves before each use for holes, worn areas, stretched fabric, and contamination. Remove damaged gloves from service. Reuse only while condition and cleanliness remain suitable for the task. Wash with commercial detergent at no more than 122°F. Air-dry or tumble-dry without heat, following supplier instructions and facility procedures.
Specify S3410HF, the size, and quantities in 10-dozen packs when ordering replacements.
FAQ
- How many pairs are included? Each pack contains 120 pairs.
- Are these pure cotton gloves? No. The listed material is a polyester/cotton blend.
- Can either glove fit either hand? Yes. The design is ambidextrous.
- Are they approved for direct food contact? The supplier lists food-contact compliant component materials. Maintain cleanliness and follow facility hygiene procedures.
- Can they serve as glove liners? Only if the combined fit and outer glove instructions allow it.
- Which sizes can I order? Small or Large.
