Full-Leg Chainsaw Protection Without External Chap Straps
ArborPants are chainsaw protective pants developed for arborists, forestry crews, tree-service professionals, and grounds teams. ProlarLite protective padding is built into the pants, while Cordura nylon covers the front and waist. Kevlar-reinforced areas at the thighs, knees, and ankles add wear resistance where work pants commonly meet brush, bark, and rough surfaces. Three-point suspender loops and 1.5-inch belt loops provide two ways to support the pants. Four deep pockets use zippers and protective flaps, and adjustable ankle snaps help control the leg opening. Follow the garment label for washing and drying; improper care can affect the protective assembly.
The nylon-spandex seat and back support movement during climbing, cutting, and ground work. An elasticized waist expands up to 8 inches, and the size options combine a waist range with a specific inseam. Select the required size and inseam before ordering.
Key Features
- Built-in ProlarLite padding
- No external chap straps
- Cordura nylon front and waist
- Kevlar-reinforced wear zones
- Flexible nylon-spandex back
- Four deep zippered pockets
Common Uses
- Professional tree care
- Arborist climbing work
- Forestry operations
- Grounds maintenance
- Storm cleanup
- Chainsaw cutting tasks
ASTM and UL Product Information
The ERB catalog identifies ArborPants as UL tested and certified and states that they meet ASTM F1897-2020 and the ASTM F1414 test method at an upgraded test level of 2,750 feet per minute. The same catalog lists CAN/BNQ 1923-450-M91 Class A, B, or C. Confirm that the label on the selected garment matches the protection required by the employer's hazard assessment.
Select the Correct Waist and Inseam
Choose the option that matches both measurements: Medium is offered in a 29 to 35 inch waist with a 29 or 32 inch inseam; Large is offered in a 35 to 41 inch waist with a 31 or 34 inch inseam; and XL is offered in a 41 to 47 inch waist with a 32 inch inseam. Do not select by the letter size alone.
ArborPants Chainsaw Safety Pants FAQ
What standard do ArborPants chainsaw protective pants meet?
The ERB catalog states that ArborPants meet ASTM F1897-2020 and are tested using ASTM F1414 at an upgraded test level of 2,750 feet per minute. Confirm the garment label and employer requirements before use.
Are these full pants or removable chainsaw chaps?
They are full chainsaw protective pants with ProlarLite padding built into the garment. They do not use the external leg straps found on removable chaps.
How should I choose an ArborPants size?
Match both your waist range and inseam. Available combinations include Medium 29 to 35 inch waist with 29 or 32 inch inseam, Large 35 to 41 inch waist with 31 or 34 inch inseam, and XL 41 to 47 inch waist with 32 inch inseam.
Where are the Kevlar-reinforced areas?
The manufacturer catalog identifies Kevlar reinforcement at the thighs, knees, and ankles. Cordura nylon is used at the front and waist, while the seat and back use a flexible nylon-spandex fabric.
Can chainsaw safety pants prevent every injury?
No. Chainsaw protective clothing is intended to help reduce injury severity within tested conditions, but it cannot eliminate the hazard. Safe work practices, training, inspection, and the complete PPE program remain necessary.
Can ArborPants be washed?
The ERB catalog describes the pants as washable. Follow the sewn-in care label and manufacturer instructions because unsuitable laundering, bleach, heat, repairs, or damage can affect the protective assembly.
