Women-Specific FR Shirt for Arc and Flash-Fire Programs
The Portwest FR724 Bizflame 88/12 Women's FR Shirt combines a women-specific fit with verified dual-hazard performance. Portwest rates the garment to ASTM F1959 at an ATPV of 8.2 cal/cm², placing it in arc-flash PPE Category 2, and lists compliance with NFPA 2112, NFPA 70E, and ASTM F1506.
The 7 oz shell uses 88% cotton and 12% nylon for a lightweight work-shirt profile. Two button-flap chest pockets, a pen division, button cuffs, a radio loop, and a shirt-tail hem support daily industrial use. ASA currently offers navy FR724 shirts in sizes S through XL, sold individually.
Quick Buying Details
Key Features
- Women-specific workwear fit
- Lightweight 7 oz FR fabric
- ATPV 8.2 cal/cm²
- Two button-flap pockets
- Adjustable button cuffs
- Stay-tucked shirt-tail hem
Common Work Environments
- Electrical maintenance
- Utilities and power generation
- Oil and gas operations
- Industrial manufacturing
- Refining and processing
- Field service work
Arc-Flash and Flash-Fire Garment Selection
CAT 2 identifies an arc-flash PPE category; it does not mean this shirt is suitable for every energized task or flash-fire exposure. The employer must complete the applicable hazard assessment and select a complete protective clothing system with an arc rating above the estimated incident energy. Confirm the FR724 garment label, fit, condition, compatible lower-body clothing, closures, layers, laundering instructions, and other required PPE before use. Replace garments that are damaged, contaminated, or no longer serviceable.
FAQ - Portwest FR724 Women's FR Work Shirt
What is the arc rating of the Portwest FR724 shirt?
Portwest reports an ASTM F1959 ATPV of 8.2 cal/cm² for FR724. This places the garment in arc-flash PPE Category 2. Selection still depends on the task-specific incident-energy or PPE-category assessment and the complete clothing system.
Does the FR724 comply with NFPA 2112?
Yes. Portwest lists FR724 to NFPA 2112 for flash-fire protective garments. Portwest also lists NFPA 70E and ASTM F1506 for the product.
What fabric is used in this women's FR work shirt?
The shell is 7 oz Bizflame 88/12 fabric made from 88% cotton and 12% nylon. Portwest describes the garment as having permanent flame resistance.
Is this a unisex or women-specific shirt?
FR724 is specifically designed with a women's fit. Review the Portwest size chart and select the size based on actual body measurements rather than assuming a unisex conversion.
Which sizes and color does ASA offer?
ASA currently lists the Portwest FR724 in navy and sizes S, M, L, and XL. Available selections may change, so use the product options shown above the description when ordering.
How should the Portwest FR724 be washed?
Portwest specifies normal washing up to 60°C, no bleach, low-temperature tumble drying, ironing up to 110°C, and no dry cleaning. Follow the sewn garment label and the employer's FR clothing care program.
Does UPF 40+ replace other sun protection?
No. Portwest rates the fabric UPF 40+ and states that it blocks 98% of UV rays, but the shirt only protects covered areas. Use the employer's complete heat- and sun-exposure controls for the task.
Is the shirt sold individually?
Yes. This ASA listing is sold as one Portwest FR724 women's FR work shirt each.
