Fire Resistant Contractors Coverall: Safety Meets Functionality
Bizweld Work FR coveralls provide flame-resistant, arc-rated coverage for contractor and industrial clothing programs. The 9.5 oz, 100% cotton fabric has an ATPV of 11.2 cal/cm², with CAT 2 listed by Portwest. A generous fit and side elastic waist accommodate movement during maintenance and field work.
The concealed snap front provides access without an exposed zipper. Snap-adjustable cuffs help set the wrist fit, while eight pockets organize small tools and essentials. Two chest pockets have snap closures, and the design includes a concealed phone pocket, rule storage and mic tabs.
Quick Buying Details
Key Features
- Generous coverall fit
- Concealed snap front
- Two snap-closure chest pockets
- Concealed phone and rule storage
- Radio mic tabs
Common Uses & Applications
- Industrial contractor work
- Oil and gas maintenance
- Petrochemical operations
- Assessed welding and related tasks
- Electrical and renewable-energy maintenance
Manufacturer-Listed Standards
The Portwest UBIZ1 technical datasheet PDF lists NFPA 2112, ASTM F1506 and ASTM F1959 with ATPV 11.2 cal/cm². It also lists EN ISO 11611 Class 1 A1+A2 and EN ISO 11612 A1+A2, B1, C1, E2, F1.
Portwest references NFPA 70E for workplace electrical-safety applications. NFPA 70E guides safe work practices and PPE selection; it is not a standalone garment certification. Check the supplied garment label and required standards before issue.
OSHA Requirements and Selection
OSHA 29 CFR 1910.335(a)(1)(i) requires protective equipment appropriate to electrical hazards and exposed body parts. For covered electric-power work, 1910.269(l)(8) addresses arc and flame protection.
Select the complete PPE system through the hazard assessment. CAT 2 does not authorize every energized task, and this coverall does not insulate against electrical shock. Additional head, face, hand and foot protection may be required.
Fit and Care
Check the Size Chart tab and current ASA options. Allow room for required layers, then check reaching, bending and kneeling. Keep closures fastened as directed. Portwest specifies a mild wash up to 40°C, no bleach, no tumble drying, line drying, no ironing and no dry cleaning. Follow the sewn label and inspect for damage or contamination before reuse.
FAQ
- Is the arc rating 9.5 or 11.2? Portwest lists ATPV 11.2 cal/cm². The 9.5 oz figure describes fabric weight.
- Does it have a zipper? UBIZ1 uses a concealed snap front and snap-adjustable cuffs.
- How many pockets are provided? Portwest lists eight pockets.
- Is it fireproof? No. Flame resistance does not eliminate burn hazards.
- Is it suitable for all welding? No. Match the documented Class 1 rating and complete PPE to the assessed process and exposure.
- Can I add layered arc ratings? No. A layered system needs its own substantiated rating.
