Ansell Sol-Vex 37-145 Nitrile Chemical Resistant Gloves — 12 Pairs
Ansell AlphaTec Solvex 37-145 gloves provide an unlined nitrile option for chemical handling, maintenance and cleaning tasks. Their 11-mil palm supports dexterity, while the 13-inch gauntlet extends coverage beyond the wrist. ASA SKU ANE37-145 is sold as 12 pairs for replenishing workplace glove supplies.
Key Features
- No cotton flock lining
- Thin palm for tactile handling
- Gauntlet cuff for extended coverage
- ANSI abrasion Level 4
Common Uses and Applications
- Equipment repair and maintenance
- Cleaning tools with compatible chemicals
- Filling and blending raw materials
- Transferring assessed liquids and solids
Match Chemical Protection to the Task
Ansell lists EN ISO 374-1:2016 Type A with chemical code JKNOPT. This classification applies to specified laboratory tests, not every chemical or mixture. Review the exact substance, concentration, temperature and exposure duration against Ansell's permeation data before selecting the glove.
Do not treat laboratory breakthrough time as a guaranteed wearing time. Your workplace assessment should establish replacement intervals and procedures for contaminated gloves. Compare chemical resistant gloves when the work requires a different material, thickness or cuff length.
Understand the Mechanical Ratings
The current manufacturer listing gives EN 388:2016+A1:2018 performance code 3001X and ANSI/ISEA 105-2024 abrasion Level 4. The EN abrasion result is Level 3. These are separate test systems; the glove should not be described as Level 4 under both.
Abrasion resistance does not establish cut protection or resistance to hypodermic needles. Evaluate sharp edges and puncture hazards separately. This model's unlined construction also differs from cotton-flocked Sol-Vex styles, so check the model number when replacing existing stock.
OSHA Hand Protection Requirements
OSHA 29 CFR 1910.138 requires appropriate hand protection for identified hazards. Employers must consider glove performance, tasks, conditions and duration of use. Manufacturer test results support this selection process; they do not constitute OSHA approval.
Food Handling and Inspection
Ansell states that this model meets EU and FDA food-handling requirements. Confirm suitability for the specific food-contact task and follow facility hygiene procedures. Inspect gloves before use for holes, tears, swelling or other deterioration. Remove damaged gloves from service and follow the manufacturer's use instructions.
Check fit with the tools used during the job. Excess material at the fingertips can interfere with handling, while a tight fit can restrict movement. Keep contaminants from entering the cuff opening.
Manufacturer Documentation
Read the official manufacturer page for specifications and chemical test resources.
FAQ: Sol-Vex 37-145 Gloves
Are these flock lined?
No. Model 37-145 has no inner cotton flocking.
How many pairs are included?
ASA sells this item as 12 pairs.
Which grip finish does this model use?
Ansell specifies sandpatch, not a choice of interchangeable finishes.
Are these gloves latex-free?
Ansell lists them as latex-free. This does not guarantee freedom from all skin sensitivities.
