Powdered Vinyl Disposable Gloves, 1,000 per Case
These powdered vinyl disposable gloves provide basic hand coverage for light-duty, non-medical work where glove powder is permitted. The ambidextrous design allows either glove to fit either hand. Each case contains 1,000 individual gloves in 10 boxes of 100. Manufacturers vary for ASA SKU 600-6000; review the supplied model's details when specific purchasing requirements apply.
Key Features
- Powdered vinyl construction
- Ambidextrous, single-use design
- Four listed size options
- 100-glove boxes for workstation distribution
Common Uses and Applications
- Non-hazardous packaging and sorting
- General inspection tasks
- Light manufacturing support
- Routine handling where powder is allowed
Powdered or Powder-Free?
A powdered interior can assist donning, but residue may be unsuitable for the product or surface being handled. Check workplace restrictions before issuing these gloves. For tasks requiring a powder-free option, compare ASA's powder-free vinyl disposable gloves. Powder-free construction alone does not establish cleanroom, medical or chemical suitability.
Fit and dimensions can vary between supplied brands. Choose a size that allows finger movement without excess loose material. Verify thickness against the current manufacturer's labeling; a uniform 3 mil specification is not confirmed across every shipment.
Non-Medical Use and Safety Requirements
The FDA prohibits powdered patient examination and surgical gloves. This listing is for non-medical use and must not be treated as an examination or surgical glove option.
OSHA 29 CFR 1910.138 requires employers to select hand protection based on hazards, glove performance, tasks and exposure conditions. It does not certify this product. No chemical breakthrough times, cut ratings or bloodborne-pathogen protection are assigned to these varying models.
Food Contact and Supplier Documentation
For food handling, confirm both the supplied model's food-contact suitability and your facility's permission to use powdered gloves. A general-purpose label does not establish food-contact compliance. Keep packaging and lot details available so documentation can be matched to the gloves actually received.
When comparing replacements, review the intended use and performance information for each model rather than choosing by material name alone. Communicate mandatory specifications before accepting a substitution. Keep different sizes clearly labeled at dispensing points so staff can select the appropriate fit without opening several boxes during work.
Ordering and Glove Changes
The minimum purchase is 10 cases, totaling 10,000 individual gloves. Select the required size before ordering. Inspect gloves before use, discard damaged or soiled gloves, and change them between tasks according to workplace procedures. Do not wash disposable gloves for reuse. Follow supplier storage directions and keep unused stock clean.
FAQ
- Will each order contain the same brand? No. Manufacturers vary for this SKU.
- How many gloves are in one case? One case contains 10 boxes of 100 individual gloves, not 1,000 pairs.
- Are these vinyl examination gloves? No. They are powdered gloves for non-medical tasks.
- Is a manufacturer datasheet available? No single sheet covers all suppliers. Documentation must match the supplied model.
