Orange Oilfield Work Gloves
Cordova OGRE 7701 oilfield work gloves combine an orange spandex back, synthetic leather palm and raised silicone grip. TPR reinforcement covers the knuckles, fingers and back of the hand, while aramid fabric reinforces the thumb crotch. ASA identifies this model as S7701HF.
Key Features
- Raised silicone dots add palm texture.
- Four-way stretch back allows hand movement.
- TPR guards reinforce exposed hand areas.
- Reinforced thumb crotch addresses a common wear point.
- Pull tab assists donning and removal.
Common Uses and Applications
Material handling, construction, masonry and petrochemical maintenance. Evaluate fit and grip with the actual tools, pipes or components involved. Oilfield use does not establish chemical-barrier protection.
Manufacturer-Listed Mechanical Performance
Cordova lists EN 388: 2243 for model 7701: abrasion Level 2, circular-blade cut Level 2, tear Level 4 and puncture Level 3. This four-digit marking is not an ANSI cut rating and does not establish hypodermic-needle protection.
TPR reinforcement provides impact protection as described by Cordova. It does not make hands crush-proof or authorize contact with moving equipment. Aramid reinforcement at the thumb crotch does not establish a full aramid liner or whole-glove heat protection.
Applicable OSHA Hand-Protection Requirements
OSHA 29 CFR 1910.138 requires suitable hand protection selected for identified hazards, glove performance, task conditions and exposure duration. OSHA 1910.132(d) requires workplace hazard assessment and properly fitting PPE. These employer duties are not OSHA product approval.
Grip and Coverage
The silicone palm pattern adds texture for handling tools and materials. Grip will change with oil, mud, wear and the surface being held; test the glove in representative conditions at your workplace before issuing it. Select a different glove when the job requires documented waterproofing, electrical insulation or protection against concentrated chemicals.
Fit, Care and Selection
Choose a fit that permits gripping without loose fingertips or excessive palm material. Follow workplace restrictions around rotating equipment. Bright orange material improves visual contrast but does not replace required lighting or high-visibility apparel.
Inspect for torn seams, worn palms and damaged guards before use. Cordova specifies washing with commercial laundry detergent at temperatures no higher than 50°C/122°F, followed by air drying or tumble drying without heat. Replace damaged gloves. Compare other impact-resistant work gloves when your assessment requires different protection.
Manufacturer Specification Sheet
California warning: Cancer and Reproductive Harm — www.P65Warnings.ca.gov.
FAQ: Cordova OGRE 7701
Is this a chemical-resistant glove?
Do not select it as a chemical barrier without substance-specific supporting data.
Does the glove have an aramid liner?
The documented reinforcement is at the thumb crotch.
Does orange coloring guarantee visibility?
No. Visibility depends on lighting, contamination and surroundings.
Which model should I reference when reordering?
Cordova OGRE 7701 and ASA SKU S7701HF.
