Howard Leight Max Foam Earplugs Without Cord | NRR 33 dB | Box of 200 Pairs
Howard Leight MAX-1 uncorded earplugs provide NRR 33 dB hearing protection in a box of 200 individually bagged pairs. The orange polyurethane foam has a contoured bell shape that rolls down for insertion and expands inside the ear canal. This single-use format supports routine employee issue, contractor access and visitor hearing protection programs.
The smooth outer skin helps resist dirt buildup, while the flared profile helps reduce the tendency to back out after insertion. Correct fitting remains essential. An uncorded design removes the connecting cord, but product selection must still account for workplace noise, individual fit and site rules.
Howard Leight MAX-1
SMAX-1
200 pairs per box
NRR 33 dB
Polyurethane foam; contoured bell
Uncorded, single-use; individually bagged pairs
Key Features
- Roll-down foam conforms within the ear canal.
- Bell-shaped profile supports retention.
- Smooth surface helps resist soil buildup.
- Individual bags protect unused pairs during storage and distribution.
- 200-pair boxes support recurring workplace replenishment.
Common Uses and Applications
- Manufacturing, stamping and fabrication operations.
- Construction and industrial maintenance.
- Foundries, sawmills and other assessed noise-exposure areas.
- Employee, contractor and visitor PPE stations.
Fitting and Single-Use Care
With clean hands, roll each plug into a narrow, crease-free cylinder. Pull the ear up and back, insert as directed and hold for 30–40 seconds while the foam expands. Follow the package instructions and check the fit before entering hazardous noise. Bright coloring makes the plugs visible; it does not confirm an effective seal.
Discard single-use plugs after use and replace them sooner if dirty or damaged. Do not treat MAX-1 as a washable reusable plug. Keep unopened stock clean and dry, and follow the storage and expiry information supplied with the product.
Buying and Dispenser Selection
This listing supplies bagged pairs, not loose dispenser refills. The manufacturer identifies MAX-LS4 for the Leight Source 400 and MAX-1-D for the Leight Source 500. Match the refill to the dispenser before ordering. When comparing bell-shaped and tapered plugs, use wearer trials and fit results rather than shape or NRR alone.
Hearing Protection Standards
The manufacturer reports NRR 33 under ANSI S3.19-1974. This laboratory rating is not a guaranteed 33 dB reduction for each wearer. OSHA 29 CFR 1910.95 requires attenuation evaluation, fitting and training. OSHA 1926.101 addresses construction hearing protection.
NIOSH recommends individual quantitative fit testing to determine personal attenuation. Select protection using measured exposure and verified fit; do not simply subtract the package NRR from a workplace noise reading.
Manufacturer Documentation
FAQ
Does 200 pairs mean 200 individual plugs?
No. A box contains 200 pairs, or 400 individual earplugs.
Are standard MAX-1 plugs metal detectable?
No metal-detectable claim applies to this listing. Facilities requiring detection should select a documented detectable model.
Does NRR 33 make MAX-1 suitable for every noisy task?
No. Suitability depends on exposure, fit and consistent wear. Some tasks require additional controls or dual protection.
