The ANSI Class 2 Safety Vest with Hood is a breathable mesh safety vest designed for construction crews, utility teams, transportation operations, municipal public works departments, warehouse yards and other workplaces requiring high-visibility apparel.
This ANSI safety vest meets ANSI/ISEA 107-2020 Class 2 requirements. It combines a 100% polyester open-mesh body with an attached UV-protected hood, making it a practical hi-vis vest with hood for warm-weather and outdoor work.
Two-inch reflective stripes applied over four-inch contrast-color tape help improve worker conspicuity during daylight and low-light conditions. The zipper front keeps the vest securely closed, while six pockets and one mic tab provide accessible storage for small tools, pens, identification and work essentials.
The attached hood carries a UPF 15+ rating. This rating applies to the hood only, not the entire vest. Available in high-visibility yellow/green and orange, with sizes from Medium through 4X, this Class 2 mesh safety vest supports individual workers and facility-wide PPE programs.
Bulk Ordering, Custom Logos & Procurement Support
Need ANSI Class 2 safety vests for a construction crew, utility department, transportation operation, warehouse, municipal agency or recurring PPE program? ASA Supplies supports business, government, municipal, contractor, facility and industrial buyers with bulk quotes, volume pricing, purchase orders and product sourcing assistance.
Company-logo safety vest requests may also be available. Contact ASA Supplies to confirm logo placement, decoration method, minimum order quantity and production lead time for this style.
Safety Note
High-visibility apparel helps improve worker conspicuity but does not eliminate struck-by or traffic hazards. Employers should select the appropriate garment type and performance class using a workplace hazard assessment and applicable safety requirements.
The attached hood is not head protection and does not replace a hard hat. The UPF 15+ rating applies to the hood only. Do not treat this garment as flame-resistant, arc-rated, waterproof, chemical-protective or impact-protective unless the product label specifically provides that rating.
Quick Buying Details
-
ASA SKU: S7048C-2
-
Product Type: ANSI Class 2 mesh safety vest with hood
-
Standard: ANSI/ISEA 107-2020 Class 2
-
Material: 100% polyester
-
Weave: Open mesh
-
Closure: Zipper front
-
Hood: Attached and UV protected
-
Hood Rating: UPF 15+ on hood only
-
Reflective Material: 2-inch reflective stripes on 4-inch contrast-color tape
-
Pockets: Six total
-
Pocket Configuration: Two pen/tool pockets, two flap pockets and two inside pockets
-
Mic Tab: One
-
Colors: High-visibility yellow/green and orange
-
Sizes: Medium, Large, XL, 2X, 3X and 4X
-
Best Use: Construction, utility, transportation, municipal, warehouse-yard and outdoor work
Key Features
-
Meets ANSI/ISEA 107-2020 Class 2 requirements
-
Attached UV-protected hood rated UPF 15+
-
UPF rating applies to the hood only
-
Breathable 100% polyester open-mesh construction
-
Two-inch reflective stripes over four-inch contrast tape
-
Zipper front closure
-
Six pockets for tools and work essentials
-
One mic tab for communication equipment
-
Available in high-visibility yellow/green and orange
-
Available in sizes Medium through 4X
-
Suitable for crew issuance and recurring PPE programs
Common Uses & Applications
-
Road construction and traffic-control operations
-
General construction jobsites
-
Municipal public works departments
-
Utility installation and maintenance
-
Transportation and logistics yards
-
Warehouse and distribution-center exterior operations
-
Grounds maintenance and landscaping near vehicle traffic
-
Facility maintenance
-
Parking and site-control operations
-
Contractor and government PPE programs
Buying Guide: Hooded Mesh Vest vs. Standard Safety Vest
Choose this ANSI Class 2 safety vest with hood when workers need the airflow of a mesh safety vest along with additional head and neck coverage from an attached UV-protected hood.
Choose a standard Class 2 mesh safety vest when workers do not need a hood or when an attached hood could interfere with other required PPE.
Choose Class 3 high-visibility apparel when the workplace hazard assessment, site rules or applicable regulations require greater body coverage or a higher visibility classification. This hooded vest should not be substituted for a waterproof rain jacket, flame-resistant garment or protective helmet.
FAQ
Is this an ANSI Class 2 safety vest?
Yes. The manufacturer identifies this garment as meeting ANSI/ISEA 107-2020 Class 2 requirements.
Is this product a hoodie or jacket?
No. It is a sleeveless polyester mesh safety vest with an attached hood. It should not be described as a sweatshirt, insulated hoodie or safety jacket.
Does the entire vest have a UPF 15+ rating?
No. The UPF 15+ rating applies to the attached hood only.
How many pockets does the vest have?
It has six pockets: two pen/tool pockets, two flap pockets and two inside pockets.
Does the vest have a zipper?
Yes. It uses a zipper front closure, making it a relevant option for buyers searching for a safety vest with pockets and a zipper.
What colors and sizes are available?
The vest is offered in high-visibility yellow/green and orange. Available sizes run from Medium through 4X.
Is this vest waterproof or flame resistant?
The verified specifications do not identify it as waterproof, flame-resistant or arc-rated. Select separately rated protective apparel when those hazards are present.
Can a company logo be added?
Logo customization may be available for qualifying orders. Contact ASA Supplies to confirm whether this specific style can be decorated, along with minimum quantities, placement and lead time.
