E-A-Rflex 28 Banded Hearing Protection for Intermittent Noise Exposure
The 3M E-A-Rflex 28 banded hearing protector, model 320-1000, provides a convenient option for industrial workers who regularly move between noisy and quieter areas. Its soft E-A-Rform foam tips respond to body temperature, while pivoting tips help maintain comfortable contact as the wearer moves. The reusable band keeps the hearing protector together between tasks.
This model carries an NRR of 28 dB with the band worn under the chin. Select it using measured workplace noise exposure and an assessment of the individual wearer’s fit. The rating does not mean every worker receives a 28 dB reduction.
3M E-A-Rflex 28 / 320-1000
S320-1000
NRR 28 dB, under-chin position
3M 320-1001
Key Features
- Soft foam tips respond to body temperature for comfort and fit.
- Pivoting tips accommodate movement during work.
- Banded design supports repeated removal and refitting between noise exposures.
- Replaceable tips allow continued use of an undamaged band.
Common Uses & Applications
- Manufacturing floor inspections and maintenance rounds.
- Warehouse equipment areas with assessed noise hazards.
- Industrial workstations involving intermittent noise exposure.
Selection, Fit & Care
Compare banded earplugs with disposable earplugs and earmuffs based on noise levels, wearing time and compatibility with other PPE. Check that clothing, eyewear and head protection do not disturb the fit. Put the protector on before entering hazardous noise and keep it correctly fitted throughout exposure.
Follow 3M’s fitting instructions rather than assuming the tips need only rest against the ear opening. Inspect the band and tips before use. Replace damaged or contaminated components, and follow the manufacturer’s cleaning and replacement instructions. Store the protector where the tips will stay clean between uses.
Hearing Conservation & Safety Standards
OSHA 29 CFR 1910.95 addresses occupational noise exposure, hearing conservation, protector selection, fitting and training. General industry employers must administer a hearing conservation program when exposures equal or exceed an 85 dBA eight-hour time-weighted average. This is an employer requirement, not an OSHA product certification.
NIOSH recommends individual quantitative hearing protector fit testing to determine personal attenuation. Laboratory NRR values cannot establish the protection received by a specific worker.
Manufacturer Product Information
Review 3M’s official E-A-Rflex 28 model 320-1000 specifications for product identification, the listed rating and replacement tip reference. Intended for industrial and occupational use.
FAQ
Which replacement tips fit this model?
Use 3M 320-1001 replacement tips for E-A-Rflex 28. Do not assume tips for other E-A-Rflex models are interchangeable.
Can the band rest around the neck between tasks?
Only after leaving hazardous noise. A protector resting around the neck provides no hearing protection; refit it before re-entering the noisy area.