Clear Replacement Face Shield Visor | PETG | ANSI Z87.1+
Crews / MCR Safety 181640 clear face shield replacement visors provide face coverage for industrial tasks involving flying debris and liquid splashes. Each PETG visor measures 8 × 16 inches and is .040 inch thick. ASA supplies this item as a 3-pack of replacement visors; headgear is sold separately.
Key Features
- Clear PETG window for work-area visibility.
- Replacement format for compatible face shield assemblies.
- Manufacturer-listed Z87+ performance.
- Three-visors-per-order packaging for replacement supplies.
Common Uses & Applications
- Manufacturing and industrial maintenance.
- Workshop tasks requiring supplementary face coverage.
- Construction work with identified debris hazards.
- Splash-exposure tasks after chemical and PPE assessment.
Headgear Compatibility & Installation
MCR describes 181640 as a universal visor. This does not guarantee that every headgear or hard-hat bracket accepts it. Check the carrier manufacturer's instructions, mounting pattern and approved visor combinations before ordering.
Install the visor with every required attachment secured. Check that it stays in position and provides the intended coverage without interfering with other PPE. Do not modify the visor or mounting holes to force a fit.
Safety Standards & Eye Protection
MCR's current product listing identifies Z87+ performance and states that 181640 meets ANSI/ISEA Z87.1-2025. Follow the markings and instructions supplied with the visor and compatible carrier.
OSHA 29 CFR 1910.133 requires eye and face protection appropriate to workplace hazards. A face shield supplements primary eye protection. Wear suitable safety glasses or goggles underneath, as explained in OSHA's PPE selection guidance.
Select splash goggles where the exposure requires them. General splash resistance does not establish compatibility with every chemical, concentration or temperature. This clear visor is not specified here for welding radiation, electrical arc flash or molten-metal exposure.
Inspection & Replacement
Inspect the visor and mounting points before use. Replace it if cracked, distorted, loose or scratched enough to obstruct vision. Follow manufacturer cleaning directions; an unsuitable cleaner can damage the viewing surface.
Keep replacement visors protected from abrasion during storage. When replenishing supplies, match model 181640 and the compatible carrier rather than selecting only by approximate dimensions. Replacing the visor does not correct damage to the headgear.
Manufacturer Documentation
MCR Safety 181640 specification sheet (PDF) confirms the visor material, dimensions and thickness. See the manufacturer product page for its current standards listing.
FAQ
- Is this a complete face shield? No. The 3-pack contains replacement visors. Compatible headgear is required and sold separately.
- Can I use it without safety glasses or goggles? No. Wear appropriate primary eye protection beneath the face shield.
- Will it fit any brand of headgear? Confirm the approved visor-and-carrier combination before purchasing or installing it.
