Construction marking paint can for upside-down jobsite marking.

Aervoe Construction Marking Paint – Inverted Spray, 12-Can Case

Aervoe
SKU:
S246
$78.98
$89.80
(You save $10.82 )
(No reviews yet)
This Construction Marking Paint is designed for professional upside-down marking applications on construction sites, utility projects, landscaping jobs, survey work, and general field marking. Formulated for good color visibility, adhesion, and durability, the mark can last up to three months, depending on traffic and exposure. The paint is designed to adhere to common jobsite surfaces including pavement, gravel, soil, concrete, asphalt, and grass, and it meets standards set by OSHA and APWA/ONE Call Systems.
Current Stock:
Adding to cart… The item has been added

Temporary Ground Marking for Utility and Jobsite Layouts

Aervoe Construction Marking Paint creates temporary identification and layout marks on pavement, gravel and soil. ASA supplies 12 inverted aerosol cans in the selected color: fluorescent red 246 or fluorescent orange 247. Match the color to the project’s marking convention before ordering.

Brand
Aervoe
ASA SKU
S246
Selling unit
12 aerosol cans
Can size
20 oz container; 15 oz net
Operation
Inverted spray
Typical coverage
Approximately 483 linear ft per can

Key Features

  • Spray-through cap for handheld marking or compatible applicators.
  • Manufacturer-listed Aervoe 1244 and 1245 applicator compatibility.
  • Marks may last up to three months, depending on traffic and exposure.
  • Paint resists washing away after drying.

Common Uses & Applications

  • Utility-location marks applied after identification
  • Construction and excavation layout
  • Landscape planning and public-works marking

Application Guidance

Apply to a dry surface. Aervoe recommends 60°F to 80°F for best results and advises against application when rain is expected within four hours. Shake as directed and keep the can moving. Do not use on short-cut turf such as golf greens. Coverage and mark duration depend on application and site conditions.

Aerosol Safety and Workplace Use

This is an extremely flammable aerosol. Follow the label and Aervoe Safety Data Sheet (PDF) for handling, ventilation, ignition control, PPE and disposal. OSHA 1910.1200 addresses workplace hazard communication, including labels, SDS access and training. Paint does not locate buried utilities or replace required utility-location procedures.

Manufacturer Technical Data

Aervoe construction marking paint data sheet (PDF) covers models 246 and 247. It distinguishes the container size from net contents and provides application and drying conditions. The manufacturer lists CARB MIR below 0.85 for this coating category.

Related Equipment

Review construction PPE, Rust-Oleum M1600 marking paint.

FAQ

Is the orange option the same as standard orange paint?

No. This listing identifies fluorescent orange 247. Confirm the selected color when matching an existing project.

Can the cans be sprayed upright?

They are designed for inverted marking. Follow the manufacturer’s separate upright valve-clearing instructions after use.

Is this a permanent marking coating?

No. It is a temporary construction marking paint; service duration varies with traffic and exposure.

This Construction Marking Paint is designed for professional upside-down marking applications on construction sites, utility projects, landscaping jobs, survey work, and general field marking. Formulated for good color visibility, adhesion, and durability, the mark can last up to three months, depending on traffic and exposure. The paint is designed to adhere to common jobsite surfaces including pavement, gravel, soil, concrete, asphalt, and grass, and it meets standards set by OSHA and APWA/ONE Call Systems.