SHOWA CHM Chem Master Neoprene Chemical Resistant Gloves
SHOWA CHM Chem Master gloves combine neoprene over natural rubber with a cotton flock lining for chemical handling and cleaning tasks. The unsupported construction allows hand movement, while the embossed tractor-tread grip supports handling wet or oily components. ASA SKU BESCHM offers Small through X-Large sizes.
Key Features
- Flexible, unsupported construction
- Cotton flock interior
- Embossed tractor-tread grip
- Extended coverage beyond the wrist
Common Uses and Applications
- Washing and industrial cleaning
- Coating preparation
- Chemical treatment after compatibility assessment
- Assembly of dry or oily parts
Chemical Standards and Selection
SHOWA lists EN ISO 374-1:2016+A1:2018 Type A with chemical code AKLMNT. This describes performance against specified test chemicals, not universal protection against acids, solvents or mixtures. Review the chemical Safety Data Sheet and manufacturer permeation data for the exact substance, concentration, temperature and contact duration.
Laboratory breakthrough times are not guaranteed safe wearing times. Establish replacement intervals based on the actual work. Compare chemical resistant gloves when another material, thickness or length better matches the exposure. Neoprene and nitrile are not interchangeable for every chemical.
Additional Manufacturer-Listed Standards
CHM carries EN 388:2016+A1:2018 code 2021X and EN ISO 374-5:2016 microorganism protection. These markings do not establish protection against every sharp object or biological exposure. Category III is a PPE category, not a chemical breakthrough time or a guarantee of suitability for a particular job.
SHOWA also lists food contact suitability. Follow its food-contact declaration and your facility's hygiene procedures when selecting gloves for food processing. This listing does not replace chemical compatibility assessment for cleaners or sanitizers.
OSHA Hand Protection Requirements
OSHA 29 CFR 1910.138 requires employers to select appropriate hand protection for identified hazards. Selection must consider performance, tasks, conditions and duration of use. The glove's manufacturer ratings support this assessment; they are not OSHA approval.
Fit, Inspection and Latex
This glove contains natural rubber latex. Consider latex sensitivity before use. Check fit and grip with representative tools, and inspect for holes, tears, swelling, stiffness or deterioration. Remove damaged gloves from service. Follow manufacturer instructions and workplace procedures for removal, cleaning and replacement.
Coordinate cuff coverage with sleeves and other protective clothing so liquids cannot enter at the wrist. Reassess glove selection whenever the process changes, including a new cleaning solution, hotter liquid or longer contact period.
Manufacturer Documentation
Review the official manufacturer page, which includes chemical-resistance resources and conformity documents.
FAQ: SHOWA CHM Chem Master Gloves
Is CHM latex-free?
No. Its construction includes natural rubber latex.
Does it have a cotton lining?
Yes. SHOWA specifies a cotton flock lining.
Which sizes are listed?
SHOWA identifies 7/Small, 8/Medium, 9/Large and 10/X-Large.
Does Type A cover every chemical?
No. Check chemical-specific data and actual exposure conditions before use.
