Challenger Reversible Raincoat – Hi-Vis Lime Green & Black 2-in-1 Waterproof Work Coat
The MCR Safety Challenger 7368CR reversible raincoat combines a lime side with silver reflective stripes and a solid black reverse. This heavyweight, knee-length waterproof coat uses 0.54 mm nylon/PVC construction for wet-weather work. MCR states that this model does not meet ANSI/ISEA 107-2020 high-visibility requirements. Its reflective appearance must not be mistaken for a certified visibility class.
The zipper front and storm flap help limit rain entry. A stand-up collar covers the neck, while take-up snaps adjust the wrists. Two slash/reach-through openings provide access to clothing underneath. A badge tab supports identification, and underarm air vents allow circulation. This coat does not include a hood.
Quick Buying Details
Key Features
- Two wearable sides in one coat
- Waterproof construction with taped seams
- Zipper front with protective storm flap
- Stand-up collar and adjustable snap wrists
- Slash/reach-through access and badge tab
- Underarm vents for airflow
Common Uses & Applications
- Security and facility patrols
- Construction and carpentry rainwear
- Landscaping and grounds maintenance
- Municipal outdoor maintenance
- Transportation yards and dock work
- General field operations where certified hi-vis apparel is not required
Visibility and Safety Requirements
Neither side should be used as a substitute for required ANSI-rated high-visibility clothing. For road maintenance, traffic zones, utilities, emergency response or industrial assignments, select apparel that meets the actual site requirements. Reflective material requires an external light source and does not guarantee that a driver will see the wearer.
OSHA 1910.132 addresses protective equipment where workplace hazards require it; it is not a product certification. No arc-flash, flame-resistance, chemical-permeation or floodwater-protection rating is established here. Oil-and-gas or hazardous industrial work may require specialized garments.
Fit, Ventilation and Care
Allow room for uniforms or workwear and check reach, walking movement and cuff adjustment with the coat closed. The vents provide airflow; they do not make the PVC layers breathable. A hoodless design does not establish compatibility with every hard hat or separate hood—check the complete equipment setup.
Follow the garment’s care label. Inspect material, taped seams, zipper, snaps and reflective trim before use. Dry fully before storage, and replace damaged rainwear. Reach-through openings provide access rather than sealed storage for items that must stay dry.
Manufacturer Documentation
MCR Safety 7368CR specifications and available document downloads
FAQ
- Does it meet ANSI Class 2 or Class 3? No. MCR explicitly states it does not meet ANSI/ISEA 107-2020 requirements.
- Is a hood included? No. This is a hoodless coat with a stand-up collar.
- Can either side face outward? Yes. Choose lime or black according to the task; neither replaces required certified hi-vis apparel.
- Can it be layered over workwear? Yes, provided the selected size allows safe movement without excessive loose fabric.
Read size chart measurements (text version)
This is the general size chart shown above. Use the specific product or manufacturer's size guide when provided.
Men's sizes — chest, waist, sleeve and inseam measurements are in inches.
- XS: chest 30–32; waist 26; sleeve 31; inseam 29.
- S: chest 34–36; waist 28–30; sleeve 32; inseam 29½.
- M: chest 38–40; waist 32–34; sleeve 33; inseam 30.
- L: chest 42–44; waist 36–38; sleeve 34; inseam 30½.
- XL: chest 46–48; waist 40–42; sleeve 35; inseam 31.
- 2XL: chest 50–52; waist 44–46; sleeve 36; inseam 31½.
- 3XL: chest 54–56; waist 48–50; sleeve 37; inseam 32.
- 4XL: chest 58–60; waist 52–54; sleeve 38; inseam 32½.
- 5XL: chest 62–64; waist 56–58; sleeve 39; inseam 33.
Women's sizes — dress-size equivalents: XS 2–4; S 6–8; M 8–10; L 12–14; XL 16–18; 2XL 20–22.
Glove sizes — hand-measurement ranges shown in the chart: S 7½–8; M 8½–9; L 9½–10; XL 10½–11. Follow the glove manufacturer's measuring instructions for the specific model.
Regular, tall and short sizing
- Regular: men's height 5 feet 8 inches to 6 feet.
- Tall: men's height 6 feet 1 inch to 6 feet 3 inches. Add 2 inches to inseam and 1 inch to sleeve length.
- Short: men's height 5 feet 3 inches to 5 feet 7 inches. Subtract 2 inches from inseam and 1 inch from sleeve length.
Measurement diagram: The image marks chest and waist across the torso, sleeve along the arm, inseam along the inside leg, hand across the palm and foot from heel to toe. It does not include a shoe-size conversion.