Ansell KSR 22-515 Vinyl Coated Work Gloves, 12 Pairs
Ansell KSR 22-515 work gloves combine a fully coated PVC exterior with a lightweight cotton interlock liner for assembly and inspection. The slip-on cuff makes removal and replacement straightforward between tasks. ASA SKU ANE22-515 is sold in 12-pair packs for workplace glove programs.
Key Features
- PVC coating supports small-part grip
- Cotton liner provides handling flexibility
- Slip-on cuff simplifies task changes
- Full coating covers the glove exterior
Common Uses and Applications
- Final assembly of components
- Picking, checking and marking parts
- Final inspection tasks
- Assessed automotive component handling
Mechanical Protection Standards
Ansell's product datasheet lists ANSI/ISEA 105-2024 cut level A1, abrasion Level 3 and puncture Level 2. Its product page also lists EN 388:2016+A1:2018 code 2121A, EN ISO 21420:2020 and CE Category II. These describe tested performance and product requirements; they do not establish suitability for every workplace hazard.
A1 is a low cut-resistance level. Evaluate sharp edges, contact force and handling technique before choosing this glove. Puncture performance does not establish protection against hypodermic needles, and abrasion resistance does not guarantee a fixed service life.
Choose for Grip, Fit and Coverage
The vinyl coating gives workers a gripping surface for small or awkward components, while the cotton liner supports flexibility. Check the selected size with representative parts and tools. Fingers should move comfortably without excess material interfering with handling.
Full coating describes coverage, not chemical resistance or an immersion rating. Do not use the liquid-repellent wording as proof of a tested barrier against solvents, cleaners or other hazardous liquids. For those exposures, select gloves using chemical-specific manufacturer data.
For sharper materials, compare cut resistant gloves and sleeves against the assessed task. KSR 22-515 is not antistatic or silicone-free according to Ansell, which matters when selecting gloves for sensitive processes.
OSHA Hand Protection Requirements
OSHA 29 CFR 1910.138 requires appropriate hand protection for identified hazards. Employers must evaluate glove performance against the work, conditions and duration of use. This selection requirement is not an OSHA approval of the product.
Manufacturer case packaging contains twelve bags, totaling 144 pairs. This listing is for one 12-pair pack; confirm the required size before placing an order for replenishment.
Care and Manufacturer Documentation
Inspect the coating, liner and cuff before each use. Replace gloves with tears, holes, excessive wear or contamination that compromises their suitability. Ansell lists a washing temperature of 40°C (104°F); follow its care instructions and workplace contamination procedures before reuse.
View the Ansell KSR 22-515 product data sheet (PDF) for specifications and ratings.
FAQ: KSR 22-515 Gloves
Are vinyl and PVC the same coating here?
Yes. Ansell identifies this glove's vinyl coating as PVC.
How many pairs are supplied?
This ASA listing supplies 12 pairs.
Are these chemical protective gloves?
The cited mechanical ratings do not establish chemical protection.
Are they silicone-free?
No. Ansell lists silicone-free status as no.
