Waterproof Insulated Work Gloves
Portwest A753 Cold 450 PU Waterproof Mechanical Gloves combine an internal waterproof membrane with insulation for cold, wet work. Textured, reinforced padded palms support handling while adding cushioning at the contact surface. Choose these waterproof insulated work gloves when their documented mechanical and cold-protection ratings match the task and working conditions.
Key Features
- An internal membrane provides the waterproof barrier.
- Insulation supplies thermal protection for cold conditions.
- Textured palms support grip during handling tasks.
- Reinforced palm padding adds cushioning where objects contact the hand.
- A reflective label adds a visibility detail.
Applications
Consider A753 for cold-weather maintenance, material handling, general construction, carpentry, and utility work where its ratings are suitable. Portwest identifies these task families for its mechanic glove collection. Assess sharp edges, machinery, moisture exposure, and required dexterity before choosing a glove for the job.
Choose the Right Size and Protection
For the black version, manufacturer ordering codes A753K8RM, A753K8RL, and A753K8RXL correspond to Medium, Large, and XL. Including the size code on a purchase order helps distinguish similar replacements. Use the A753 model number when comparing supplier documentation, since descriptions such as “waterproof mechanical gloves” can refer to different products.
Select Medium, Large, or XL from this listing. Check finger movement and your ability to handle the actual tools or materials before assigning sizes across a team. Compare other work gloves if your assessment requires higher cut protection or a different construction. Keep manufacturer model A753 separate from ASA SKU SA753 when recording repeat orders.
Safety Standards and OSHA Requirements
Portwest lists ANSI/ISEA 105:2016 cut A1, abrasion Level 3, and puncture Level 2, together with EN 388:2016+A1:2018, 2221X. ANSI and EN results describe separate tests; do not treat their numbered levels as interchangeable or interpret puncture resistance as needlestick protection.
The manufacturer also lists EN 511:2006, 121 for cold protection, EN 407:2020, X1XXXX for thermal performance, and EN ISO 21420:2020, dexterity Level 5. These are laboratory classifications, not a universal working-temperature range. The EN 407 marking does not establish flame resistance or arc-flash protection.
OSHA 29 CFR 1910.138 requires appropriate hand protection for identified hazards, including harmful temperature extremes. Selection must consider glove performance, the task, conditions, and duration of use. OSHA 1910.132(d) requires workplace hazard assessment and properly fitting PPE. These requirements do not constitute OSHA product approval.
Manufacturer Specification Sheet
Download Portwest A753 Product Specification and Technical Data Sheet (PDF)
Individual A753 document covering materials, waterproof construction, mechanical and thermal ratings, sizes, and ordering codes.
FAQ – A753
Are these gloves touchscreen compatible?
Touchscreen compatibility is not specified in the reviewed Portwest A753 documentation. Do not select this model on that basis.
Can they be machine washed?
Yes. Portwest lists A753 as machine washable. Follow the supplied care label for washing and drying instructions rather than assuming a temperature, detergent, or drying method.
What materials are used?
The manufacturer’s technical data sheet lists polyester, PU fabric, elastane, SBR, PE, and cotton. Material names alone do not establish resistance to a particular chemical.
Where can I check the ratings?
Consult the Portwest A753 product page and manufacturer’s A753 technical data sheet PDF for the documented standards and product specifications.
Match the standard, rating, and model together when comparing gloves. A cold-protection rating and a cut-resistance rating describe different performance characteristics; neither should substitute for evaluating hazards involved in the task.
