18-Inch ANSI A4 Arm Protection for Sharp-Edge Handling
The cut-resistant sleeve provides 18 inches of forearm coverage for work involving sharp edges and abrasive materials. Its 10-gauge, multi-filament construction combines high-strength fiber, fiberglass, and synthetic fibers, while an elastic bicep and thumb slot help the sleeve remain positioned during movement.
The 3728T to ANSI/ISEA 105-2016 Cut Level A4 at 1,470 grams. The manufacturer also publishes EN 388 performance of 454X, suitability for food contact.
Key Features
- ANSI A4 cut resistance
- 18-inch arm coverage
- Elastic bicep
- Integrated thumb slot
- EN 407 contact heat Level 2
- Food-contact suitable
Common Uses
- Glass handling
- Sheet-metal handling
- Metal fabrication
- Industrial assembly
- Food-processing tasks
- Forearm protection with cut gloves
Fit and Coverage
The elastic bicep and thumb slot are designed to help maintain wrist-to-upper-forearm coverage. Pair the sleeve with task-appropriate cut-resistant gloves when the hazard assessment requires protection for both the hands and arms.
Cordova MONARCH 3728T Cut-Resistant Sleeve FAQ
What cut rating does the 3728T sleeve have?
ANSI/ISEA 105-2016 Cut Level A4 rating of 1,470 grams for model 3728T.
How long is the 3728T arm sleeve?
The sleeve is 18 inches long and is designed to extend coverage from the wrist along the forearm.
How does the sleeve stay in place?
It has elastic at the bicep and an integrated thumb slot. One size fits most.
What material is used in the MONARCH sleeve?
The 10-gauge sleeve uses a multi-filament yarn that combines high-strength fiber, fiberglass, and synthetic fibers.
Is this sleeve rated for contact heat?
Yes. EN 407 contact heat Level 2, tested at 482 degrees F for 15 seconds. This test classification should not be treated as a safe continuous-contact temperature or as flame protection.
Is the 3728T suitable for food-contact work?
The sleeve as safe for food contact. The employer must still confirm that the complete PPE and sanitation program is appropriate for the specific task and facility.
Is an ANSI A4 sleeve cut-proof?
No. ANSI A4 describes tested cut resistance; it does not make the sleeve cut-proof or suitable for every sharp-edge, powered-blade, puncture, or entanglement hazard.
