Hi-Vis Surveyor Vest with Tablet Pocket – ANSI Class 2, Black Bottom

Globus Glove
SKU:
S099
Availability:
Free Shipping
$46.95
Bulk Pricing:

Below are the available bulk discount rates for each individual item when you purchase a certain amount

  • Buy 2 - 5 and get 3% off
  • Buy 6 - 9 and get 5% off
  • Buy 10 or above and get 7% off
(No reviews yet)
One of the standout features of this Safety Vest is its ample storage space. With nine pockets, including two large tablet/iPad pockets, it offers enough room for surveyors, architects, or field supervisors to carry all necessary tools and devices. The D-ring opening on the back is specifically designed to allow the vest to fit over a body harness, making it versatile enough for road construction, bridge maintenance, and other demanding jobs.
Fixed Shipping Cost:
$8.95
Current Stock:
Adding to cart… The item has been added

Field-Ready Storage for Surveying, Inspection, and Construction Crews

The premium surveyor safety vest combines Type R Class 2 high visibility with organized storage for field documents, compatible tablets, marking supplies, and communication equipment. Its high-visibility yellow-green polyester construction uses a solid front, mesh back, black lower front, contrasting orange trim, and 3M reflective material.

Nine pockets include five exterior and four interior pockets, with two inside tablet pockets. A padded neoprene neck, reinforced zipper, mic tabs, grommets, elastic spray-can holders, and a rear D-ring opening support demanding field workflows.

ManufacturerGlobal Glove and Safety
BrandFrogWear
ModelS099
ClassificationANSI/ISEA 107-2015 Type R Class 2
Reflective Material3M reflective material
PocketsNine: five exterior and four interior
Tablet StorageTwo inside tablet pockets
ClosureReinforced front zipper

Key Features

  • Type R Class 2 visibility
  • 3M reflective material
  • Nine organized pockets
  • Two tablet pockets
  • Padded neoprene neck
  • Spray-can holders

Common Uses

  • Land surveying
  • Construction inspection
  • Road and utility work
  • Warehouse operations
  • Airport ground crews
  • Jobsite supervision

Storage and Attachment Layout

The vest includes an upper dual-tier pocket for pens or markers, a large upper pocket with flap, lower pockets with flaps, elastic holders for compatible spray-paint cans or bottles, four grommets, shoulder mic tabs, and two interior tablet pockets with retention straps. The black lower front helps conceal routine surface dirt; it does not change the garment's protective classification.

Ordering Guidance

Select the required size before adding the vest to the cart. ASA currently lists medium through 2XL, while the manufacturer sheet also identifies additional sizes. Confirm the size-specific UPC, inventory, price, and garment label for the exact option ordered.

FrogWear GLO-099 Surveyor Safety Vest FAQ

What visibility classification does the 099 have?

The product sheet identifies 099 as ANSI/ISEA 107-2015 Type R Class 2. Confirm the sewn-in label and the standard edition required by the employer or purchasing specification before use.

How many pockets does this surveyor vest have?

It has nine pockets: five exterior and four interior. Two of the interior pockets are designed for compatible tablets.

Will every iPad or tablet fit?

No universal fit should be assumed. Measure the tablet with its protective case and compare those dimensions with verified pocket measurements before ordering.

Does the vest use 3M reflective material?

Yes. The manufacturer specifies 3M reflective material with contrasting orange trim for the 099.

What are the elastic side holders for?

The left and right elastic holders are intended for compatible spray-paint cans or bottles used during surveying, marking, inspection, and field work.

Can the vest be worn with a fall-arrest harness?

The vest has a rear D-ring opening, but the vest itself is not fall-protection equipment. A competent person must confirm compatibility with the complete harness system, and the harness must remain correctly fitted, connected, and inspected.

Is this vest OSHA certified?

OSHA does not certify individual safety vests. Employers must select appropriate high-visibility apparel based on applicable regulations, work-zone requirements, and the job hazard assessment.

One of the standout features of this Safety Vest is its ample storage space. With nine pockets, including two large tablet/iPad pockets, it offers enough room for surveyors, architects, or field supervisors to carry all necessary tools and devices. The D-ring opening on the back is specifically designed to allow the vest to fit over a body harness, making it versatile enough for road construction, bridge maintenance, and other demanding jobs.
General men's apparel, women's apparel and glove size chart. Read the measurements and tall/short adjustments in the text version below.
Read size chart measurements (text version)

This is the general size chart shown above. Use the specific product or manufacturer's size guide when provided.

Men's sizes — chest, waist, sleeve and inseam measurements are in inches.

  • XS: chest 30–32; waist 26; sleeve 31; inseam 29.
  • S: chest 34–36; waist 28–30; sleeve 32; inseam 29½.
  • M: chest 38–40; waist 32–34; sleeve 33; inseam 30.
  • L: chest 42–44; waist 36–38; sleeve 34; inseam 30½.
  • XL: chest 46–48; waist 40–42; sleeve 35; inseam 31.
  • 2XL: chest 50–52; waist 44–46; sleeve 36; inseam 31½.
  • 3XL: chest 54–56; waist 48–50; sleeve 37; inseam 32.
  • 4XL: chest 58–60; waist 52–54; sleeve 38; inseam 32½.
  • 5XL: chest 62–64; waist 56–58; sleeve 39; inseam 33.

Women's sizes — dress-size equivalents: XS 2–4; S 6–8; M 8–10; L 12–14; XL 16–18; 2XL 20–22.

Glove sizes — hand-measurement ranges shown in the chart: S 7½–8; M 8½–9; L 9½–10; XL 10½–11. Follow the glove manufacturer's measuring instructions for the specific model.

Regular, tall and short sizing

  • Regular: men's height 5 feet 8 inches to 6 feet.
  • Tall: men's height 6 feet 1 inch to 6 feet 3 inches. Add 2 inches to inseam and 1 inch to sleeve length.
  • Short: men's height 5 feet 3 inches to 5 feet 7 inches. Subtract 2 inches from inseam and 1 inch from sleeve length.

Measurement diagram: The image marks chest and waist across the torso, sleeve along the arm, inseam along the inside leg, hand across the palm and foot from heel to toe. It does not include a shoe-size conversion.