MCR Safety Big Jake 1700 Leather Palm Work Gloves
MCR Safety Big Jake 1700 leather palm work gloves combine Premium A+ grade split-side cowhide with Kevlar stitching, a cotton canvas back and an 8-ounce jersey palm lining. The 2¾-inch rubberized safety cuff extends coverage beyond the hand. ASA SKU SMEM1700 is sold by the dozen, with 12 pairs per order.
Key Features
- Heavy split-side leather palm
- Sewn with Kevlar thread
- Cotton canvas back
- Wing thumb construction
Common Uses and Applications
- Heavy material handling
- Construction support tasks
- Industrial maintenance after assessment
- Handling rough components
Verified Construction
Model 1700 uses split-side cow leather rather than a full-grain shell. Its jersey palm lining provides an interior layer between the hand and leather. The cotton canvas back and wing thumb complete the leather-palm design. This model has a safety cuff, not an adjustable hook-and-loop closure.
Check cuff coverage with work sleeves before handling materials. Choose a size that allows finger movement without excess material at the tips. Test grip on the actual objects used during the job, especially when their surfaces are wet, oily or difficult to hold.
Manufacturer-Listed Performance
MCR Safety lists abrasion level 4, puncture level 5 and contact heat level 2. Its product page also lists EN 388 abrasion level 4. These are individual performance results; the reviewed documentation does not provide a numerical cut rating for model 1700.
Puncture level 5 is not cut level A5 and does not establish needlestick protection. Kevlar stitching helps identify the construction but does not make the whole glove cut-proof, flame-rated or suitable for electrical work. Evaluate each required protection separately.
The contact heat score is not a blanket authorization for welding or hot-material handling. Confirm the intended contact conditions with the manufacturer. Compare cut resistant gloves and sleeves when sharp-edge hazards require a documented cut rating.
OSHA Hand Protection Requirements
OSHA 29 CFR 1910.138 requires employers to select suitable hand protection for identified hazards. Selection must account for performance, tasks, conditions and duration of use. This workplace requirement does not constitute OSHA approval of Big Jake gloves.
Inspection and Manufacturer Documentation
Inspect the palm, stitching, lining and cuff before use. Replace gloves when damage, contamination or wear compromises their suitability. Follow MCR Safety's care instructions. Keep the model number with purchasing records because other Big Jake gloves use different linings, cuffs and protection features.
Review the MCR Safety Big Jake 1700 specification sheet (PDF).
FAQ: Big Jake Leather Work Gloves
How many pairs are included?
One order unit contains 12 pairs, or 24 individual gloves.
Is the palm fleece-lined?
No. MCR specifies an 8-ounce jersey palm lining.
Are these rated cut level A5?
No. The listed level 5 concerns puncture performance.
Is this the Kevlar-lined 1702 model?
No. This listing is for model 1700 with Kevlar stitching.
